From 48ca75555522716f0f686dcae3dd6cf3d8ad714d Mon Sep 17 00:00:00 2001 From: davidovski Date: Tue, 31 May 2022 11:05:19 +0100 Subject: removed idea of repos --- ...in-mkmntdirs-in-localmount-OpenRC-service.patch | 25 - .../0002-fsck-don-t-add-C0-to-busybox-fsck.patch | 35 -- ...sysinit-and-boot-as-stacked-levels-when-n.patch | 70 --- ...efont-service-compatible-with-busyboxs-se.patch | 70 --- ...rly-loading-of-keymap-if-kbd-is-installed.patch | 31 - ...-for-starting-services-in-a-specified-VRF.patch | 101 ---- ...aticroute-config-remove-irrelevant-parts-.patch | 47 -- ...-switch-wipe_tmp-setting-to-no-by-default.patch | 44 -- .../system/openrc/0009-fix-bootmisc-mv-error.patch | 27 - repo/system/openrc/0010-noexec-devfs.patch | 14 - repo/system/openrc/firstboot.initd | 34 -- repo/system/openrc/hostname.initd | 18 - repo/system/openrc/hwdrivers.initd | 32 -- repo/system/openrc/machine-id.initd | 17 - repo/system/openrc/modloop.confd | 6 - repo/system/openrc/modloop.initd | 153 ----- repo/system/openrc/modules.initd | 80 --- repo/system/openrc/networking.initd | 88 --- repo/system/openrc/openrc.logrotate | 4 - repo/system/openrc/openrc.post-install | 38 -- repo/system/openrc/openrc.post-upgrade | 35 -- repo/system/openrc/openrc.xibuild | 139 ----- repo/system/openrc/rc.conf | 313 ---------- repo/system/openrc/seedrng.patch | 640 --------------------- repo/system/openrc/sysctl.initd | 87 --- repo/system/openrc/sysfsconf.initd | 66 --- repo/system/openrc/test-networking.sh | 65 --- 27 files changed, 2279 deletions(-) delete mode 100644 repo/system/openrc/0001-call-sbin-mkmntdirs-in-localmount-OpenRC-service.patch delete mode 100644 repo/system/openrc/0002-fsck-don-t-add-C0-to-busybox-fsck.patch delete mode 100644 repo/system/openrc/0003-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch delete mode 100644 repo/system/openrc/0004-make-consolefont-service-compatible-with-busyboxs-se.patch delete mode 100644 repo/system/openrc/0005-Support-early-loading-of-keymap-if-kbd-is-installed.patch delete mode 100644 repo/system/openrc/0006-Add-support-for-starting-services-in-a-specified-VRF.patch delete mode 100644 repo/system/openrc/0007-Clean-up-staticroute-config-remove-irrelevant-parts-.patch delete mode 100644 repo/system/openrc/0008-bootmisc-switch-wipe_tmp-setting-to-no-by-default.patch delete mode 100644 repo/system/openrc/0009-fix-bootmisc-mv-error.patch delete mode 100644 repo/system/openrc/0010-noexec-devfs.patch delete mode 100644 repo/system/openrc/firstboot.initd delete mode 100644 repo/system/openrc/hostname.initd delete mode 100644 repo/system/openrc/hwdrivers.initd delete mode 100644 repo/system/openrc/machine-id.initd delete mode 100644 repo/system/openrc/modloop.confd delete mode 100755 repo/system/openrc/modloop.initd delete mode 100644 repo/system/openrc/modules.initd delete mode 100644 repo/system/openrc/networking.initd delete mode 100644 repo/system/openrc/openrc.logrotate delete mode 100644 repo/system/openrc/openrc.post-install delete mode 100644 repo/system/openrc/openrc.post-upgrade delete mode 100644 repo/system/openrc/openrc.xibuild delete mode 100644 repo/system/openrc/rc.conf delete mode 100644 repo/system/openrc/seedrng.patch delete mode 100644 repo/system/openrc/sysctl.initd delete mode 100644 repo/system/openrc/sysfsconf.initd delete mode 100644 repo/system/openrc/test-networking.sh (limited to 'repo/system/openrc') diff --git a/repo/system/openrc/0001-call-sbin-mkmntdirs-in-localmount-OpenRC-service.patch b/repo/system/openrc/0001-call-sbin-mkmntdirs-in-localmount-OpenRC-service.patch deleted file mode 100644 index 3d41060..0000000 --- a/repo/system/openrc/0001-call-sbin-mkmntdirs-in-localmount-OpenRC-service.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 78245081fe109ed7777b79ba9c99890d56c21272 Mon Sep 17 00:00:00 2001 -From: Natanael Copa -Date: Wed, 1 Feb 2017 04:04:52 +0000 -Subject: [PATCH] call /sbin/mkmntdirs in localmount OpenRC service - ---- - init.d/localmount.in | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/init.d/localmount.in b/init.d/localmount.in -index c571504a..14189396 100644 ---- a/init.d/localmount.in -+++ b/init.d/localmount.in -@@ -21,6 +21,8 @@ depend() - - start() - { -+ [ -x /sbin/mkmntdirs ] && mkmntdirs -+ - # Mount local filesystems in /etc/fstab. - # The types variable must start with no, and must be a type - local critical= types="noproc" x= no_netdev= rc= --- -2.33.1 - diff --git a/repo/system/openrc/0002-fsck-don-t-add-C0-to-busybox-fsck.patch b/repo/system/openrc/0002-fsck-don-t-add-C0-to-busybox-fsck.patch deleted file mode 100644 index 1d79818..0000000 --- a/repo/system/openrc/0002-fsck-don-t-add-C0-to-busybox-fsck.patch +++ /dev/null @@ -1,35 +0,0 @@ -From b143f35a45d59708365a52e329fd8caa6475a9bb Mon Sep 17 00:00:00 2001 -From: Natanael Copa -Date: Tue, 28 Nov 2017 13:35:10 +0100 -Subject: [PATCH] fsck: don't add -C0 to busybox fsck - ---- - init.d/fsck.in | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/init.d/fsck.in b/init.d/fsck.in -index 7052d808..99a9ae4f 100644 ---- a/init.d/fsck.in -+++ b/init.d/fsck.in -@@ -82,7 +82,7 @@ start() - local skiptypes - skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list}) - [ "${skiptypes}" = "no," ] && skiptypes="" -- fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev" -+ fsck_opts="$fsck_opts -T -t ${skiptypes}noopts=_netdev" - if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then - fsck_args=${fsck_args:--A -p} - if echo 2>/dev/null >/.test.$$; then -@@ -90,6 +90,9 @@ start() - fsck_opts="$fsck_opts -R" - fi - fi -+ if [ "$(readlink -f $(which fsck))" != "/bin/busybox" ]; then -+ fsck_opts="$fsck_opts -C0" -+ fi - fi - - trap : INT QUIT --- -2.33.1 - diff --git a/repo/system/openrc/0003-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch b/repo/system/openrc/0003-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch deleted file mode 100644 index 546ccb7..0000000 --- a/repo/system/openrc/0003-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 17f33c1968a51484eefdafbfb5b8fef5ac13d215 Mon Sep 17 00:00:00 2001 -From: Natanael Copa -Date: Wed, 1 Feb 2017 04:17:14 +0000 -Subject: [PATCH] rc: pull in sysinit and boot as stacked levels when needed - -We need start services from sysinit and boot runlevel, even if the new -runlevel is empty. - -This fixes problem introduced with commit 7716bf31 (Fix stacked runlevel -support), at which the start_services list are no longer used to start -the services. - -This also make sure that all services in sysinit and boot runlevels are -started before switching to next. This was not guaranteed when switching -to a non-empty runlevel. - -Fixes issue #54. ---- - src/rc/rc.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - -diff --git a/src/rc/rc.c b/src/rc/rc.c -index ef46925d..82786074 100644 ---- a/src/rc/rc.c -+++ b/src/rc/rc.c -@@ -729,6 +729,7 @@ int main(int argc, char **argv) - const char *bootlevel = NULL; - char *newlevel = NULL; - const char *systype = NULL; -+ RC_STRINGLIST *runlevel_chain; - RC_STRINGLIST *deporder = NULL; - RC_STRINGLIST *tmplist; - RC_STRING *service; -@@ -986,6 +987,7 @@ int main(int argc, char **argv) - main_hotplugged_services = rc_services_in_state(RC_SERVICE_HOTPLUGGED); - main_start_services = rc_services_in_runlevel_stacked(newlevel ? - newlevel : runlevel); -+ runlevel_chain = rc_runlevel_stacks(newlevel ? newlevel : runlevel); - if (strcmp(newlevel ? newlevel : runlevel, RC_LEVEL_SHUTDOWN) != 0 && - strcmp(newlevel ? newlevel : runlevel, RC_LEVEL_SYSINIT) != 0) - { -@@ -1003,6 +1005,7 @@ int main(int argc, char **argv) - tmplist = rc_services_in_runlevel(bootlevel); - TAILQ_CONCAT(main_start_services, tmplist, entries); - free(tmplist); -+ rc_stringlist_add(runlevel_chain, bootlevel); - } - if (main_hotplugged_services) { - TAILQ_FOREACH(service, main_hotplugged_services, -@@ -1011,6 +1014,7 @@ int main(int argc, char **argv) - service->value); - } - } -+ rc_stringlist_add(runlevel_chain, RC_LEVEL_SYSINIT); - } - - parallel = rc_conf_yesno("rc_parallel"); -@@ -1067,9 +1071,6 @@ int main(int argc, char **argv) - - /* If we have a list of services to start then... */ - if (main_start_services) { -- /* Get a list of the chained runlevels which compose the target runlevel */ -- RC_STRINGLIST *runlevel_chain = rc_runlevel_stacks(runlevel); -- - /* Loop through them in reverse order. */ - RC_STRING *rlevel; - TAILQ_FOREACH_REVERSE(rlevel, runlevel_chain, rc_stringlist, entries) --- -2.33.1 - diff --git a/repo/system/openrc/0004-make-consolefont-service-compatible-with-busyboxs-se.patch b/repo/system/openrc/0004-make-consolefont-service-compatible-with-busyboxs-se.patch deleted file mode 100644 index b92b5ac..0000000 --- a/repo/system/openrc/0004-make-consolefont-service-compatible-with-busyboxs-se.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 613fb7f437c42e0ed01b2366b597598235e64a2d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?S=C3=B6ren=20Tempel?= -Date: Wed, 17 Aug 2016 17:52:58 +0200 -Subject: [PATCH] make consolefont service compatible with busyboxs setfont - applet - -Compared to kdbs setfont program it doesn't support -O and -m. ---- - conf.d/consolefont | 11 ++--------- - init.d/consolefont.in | 7 ++----- - 2 files changed, 4 insertions(+), 14 deletions(-) - -diff --git a/conf.d/consolefont b/conf.d/consolefont -index e01ae842..75544b2f 100644 ---- a/conf.d/consolefont -+++ b/conf.d/consolefont -@@ -3,16 +3,9 @@ - # - # consolefont specifies the default font that you'd like Linux to use on the - # console. You can find a good selection of fonts in /usr/share/consolefonts; --# you shouldn't specify the trailing ".psf.gz", just the font name below. --# To use the default console font, comment out the CONSOLEFONT setting below. --consolefont="default8x16" -+consolefont="default8x16.psf.gz" - - # consoletranslation is the charset map file to use. Leave commented to use - # the default one. Have a look in /usr/share/consoletrans for a selection of - # map files you can use. --#consoletranslation="8859-1_to_uni" -- --# unicodemap is the unicode map file to use. Leave commented to use the --# default one. Have a look in /usr/share/unimaps for a selection of map files --# you can use. --#unicodemap="iso01" -+#consoletranslation="8859-1_to_uni.trans" -diff --git a/init.d/consolefont.in b/init.d/consolefont.in -index d65dd14c..ccb6ee87 100644 ---- a/init.d/consolefont.in -+++ b/init.d/consolefont.in -@@ -22,7 +22,6 @@ start() - { - ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}} - consolefont=${consolefont:-${CONSOLEFONT}} -- unicodemap=${unicodemap:-${UNICODEMAP}} - consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}} - - if [ -z "$consolefont" ]; then -@@ -43,9 +42,6 @@ start() - if [ -n "$consoletranslation" ]; then - param="$param -m $consoletranslation" - fi -- if [ -n "${unicodemap}" ]; then -- param="$param -u $unicodemap" -- fi - - # Set the console font - ebegin "Setting console font [$consolefont]" -@@ -63,7 +59,8 @@ start() - # Store the font so we can use it ASAP on boot - if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then - mkdir -p "$RC_LIBEXECDIR"/console -- setfont -O "$RC_LIBEXECDIR"/console/font -+ zcat "/usr/share/consolefonts/$consolefont" \ -+ > "$RC_LIBEXECDIR"/console/font - fi - - return $retval --- -2.33.1 - diff --git a/repo/system/openrc/0005-Support-early-loading-of-keymap-if-kbd-is-installed.patch b/repo/system/openrc/0005-Support-early-loading-of-keymap-if-kbd-is-installed.patch deleted file mode 100644 index f25d984..0000000 --- a/repo/system/openrc/0005-Support-early-loading-of-keymap-if-kbd-is-installed.patch +++ /dev/null @@ -1,31 +0,0 @@ -From a07970bf087c089f467eefa30c2476f17f6e9536 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?S=C3=B6ren=20Tempel?= -Date: Thu, 7 Mar 2019 16:55:53 +0100 -Subject: [PATCH] Support early loading of keymap if kbd is installed - -Early loading of the keymap with busybox was never supported and would -require modifying the save-keymaps services as well. Since no one -complained that it doesn't work with busybox so far just make it work -with kbd for now. ---- - sh/init-early.sh.Linux.in | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/sh/init-early.sh.Linux.in b/sh/init-early.sh.Linux.in -index f304e924..7571ff3d 100644 ---- a/sh/init-early.sh.Linux.in -+++ b/sh/init-early.sh.Linux.in -@@ -48,8 +48,8 @@ if service_present "$RC_DEFAULTLEVEL" consolefont || - fi - - # Try and set a keyboard map as early as possible --if service_present "$RC_DEFAULTLEVEL" keymaps || -- service_present "$RC_BOOTLEVEL" keymaps; then -+if service_present "$RC_DEFAULTLEVEL" loadkeys || -+ service_present "$RC_BOOTLEVEL" loadkeys; then - kbd_mode $kmode -C "$CONSOLE" 2>/dev/null - if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then - loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null --- -2.33.1 - diff --git a/repo/system/openrc/0006-Add-support-for-starting-services-in-a-specified-VRF.patch b/repo/system/openrc/0006-Add-support-for-starting-services-in-a-specified-VRF.patch deleted file mode 100644 index 6f7ed69..0000000 --- a/repo/system/openrc/0006-Add-support-for-starting-services-in-a-specified-VRF.patch +++ /dev/null @@ -1,101 +0,0 @@ -From c250503412b061e69a99cfe12514e47fc06b5885 Mon Sep 17 00:00:00 2001 -From: Ariadne Conill -Date: Fri, 14 Feb 2020 16:02:43 +0000 -Subject: [PATCH] Add support for starting services in a specified VRF. - -The venerable iproute2 utility has recently introduced support -for executing programs in specific VRFs which are virtualized -routing tables. These are typically used to isolate different -networking planes from each other, for security or flexibility -reasons. - -Services which use the normal supervisor/start-stop-daemon -pattern can be configured by setting the vrf variable in the -/etc/conf.d tree for the service. - -This allows for things like configuring the sshd service to -run in a management VRF, which is useful for high assurance -environments where the management plane is intended to be -isolated. - -Signed-off-by: Ariadne Conill ---- - sh/openrc-run.sh.in | 6 ++++++ - sh/runit.sh | 2 +- - sh/s6.sh | 2 +- - sh/start-stop-daemon.sh | 2 +- - sh/supervise-daemon.sh | 2 +- - 5 files changed, 10 insertions(+), 4 deletions(-) - -diff --git a/sh/openrc-run.sh.in b/sh/openrc-run.sh.in -index 5c84af45..a1f374b0 100644 ---- a/sh/openrc-run.sh.in -+++ b/sh/openrc-run.sh.in -@@ -236,6 +236,12 @@ if ! sourcex -e "$_conf_d/$RC_SVCNAME.$RC_RUNLEVEL"; then - fi - unset _conf_d - -+# If we are configured to run in a VRF, provide a hint for that -+RC_VRF_EXEC="" -+if [ -n "$vrf" ]; then -+ RC_VRF_EXEC="/sbin/ip vrf exec $vrf" -+fi -+ - # load service supervisor functions - sourcex "@LIBEXECDIR@/sh/runit.sh" - sourcex "@LIBEXECDIR@/sh/s6.sh" -diff --git a/sh/runit.sh b/sh/runit.sh -index 5d82c9f6..c0186a43 100644 ---- a/sh/runit.sh -+++ b/sh/runit.sh -@@ -23,7 +23,7 @@ runit_start() - local i=0 retval=1 - # it can take upto 5 seconds for runsv to start - while [ $i -lt 6 ] ; do -- if sv start "${service_link}" > /dev/null 2>&1; then -+ if ${RC_VRF_EXEC} sv start "${service_link}" > /dev/null 2>&1; then - retval=0 - break - fi -diff --git a/sh/s6.sh b/sh/s6.sh -index acbe965b..1f339703 100644 ---- a/sh/s6.sh -+++ b/sh/s6.sh -@@ -37,7 +37,7 @@ s6_start() - ln -sf "${s6_service_path}" "${s6_service_link}" - s6-svscanctl -na "${RC_SVCDIR}"/s6-scan - sleep 1.5 -- s6-svc -u "${s6_service_link}" -+ ${RC_VRF_EXEC} s6-svc -u "${s6_service_link}" - if [ -n "$s6_svwait_options_start" ]; then - s6-svwait ${s6_svwait_options_start} "${s6_service_link}" - fi -diff --git a/sh/start-stop-daemon.sh b/sh/start-stop-daemon.sh -index 2e549ae1..5e7a1b88 100644 ---- a/sh/start-stop-daemon.sh -+++ b/sh/start-stop-daemon.sh -@@ -45,7 +45,7 @@ ssd_start() - #the eval call is necessary for cases like: - # command_args="this \"is a\" test" - # to work properly. -- eval start-stop-daemon --start \ -+ eval ${RC_VRF_EXEC} start-stop-daemon --start \ - --exec $command \ - ${chroot:+--chroot} $chroot \ - ${directory:+--chdir} $directory \ -diff --git a/sh/supervise-daemon.sh b/sh/supervise-daemon.sh -index e403a789..259b8166 100644 ---- a/sh/supervise-daemon.sh -+++ b/sh/supervise-daemon.sh -@@ -24,7 +24,7 @@ supervise_start() - # The eval call is necessary for cases like: - # command_args="this \"is a\" test" - # to work properly. -- eval supervise-daemon "${RC_SVCNAME}" --start \ -+ eval ${RC_VRF_EXEC} supervise-daemon "${RC_SVCNAME}" --start \ - ${retry:+--retry} $retry \ - ${directory:+--chdir} $directory \ - ${chroot:+--chroot} $chroot \ --- -2.33.1 - diff --git a/repo/system/openrc/0007-Clean-up-staticroute-config-remove-irrelevant-parts-.patch b/repo/system/openrc/0007-Clean-up-staticroute-config-remove-irrelevant-parts-.patch deleted file mode 100644 index 34100ef..0000000 --- a/repo/system/openrc/0007-Clean-up-staticroute-config-remove-irrelevant-parts-.patch +++ /dev/null @@ -1,47 +0,0 @@ -From f406231dc9a49b67ca558983de80513f95078309 Mon Sep 17 00:00:00 2001 -From: Ariadne Conill -Date: Wed, 8 Sep 2021 23:51:11 -0600 -Subject: [PATCH] Clean up staticroute config - remove irrelevant parts (for - BSD, Hurd) and suggest that route(8) is legacy. - ---- - conf.d/staticroute | 23 +++-------------------- - 1 file changed, 3 insertions(+), 20 deletions(-) - -diff --git a/conf.d/staticroute b/conf.d/staticroute -index 19d0961f..49d0e0bb 100644 ---- a/conf.d/staticroute -+++ b/conf.d/staticroute -@@ -1,26 +1,9 @@ --# Static routes are defined differently depending on your operating --# system, so please be sure to use the correct syntax. - # Do not use this file to define the default route. - # In all settings, multiple routes should be separated using ; or new lines. - --# Define static routes on Linux using route. See route(8) for syntax. --#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1 --#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1" -- - # Define static routes on Linux using iproute2. See ip(8) for syntax. - #staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1" - --# Define static routes on GNU/Hurd. See route(8) for syntax. --# /etc/route.conf(5) takes precedence over this configuration. --# FIXME: "net ..." not supported --#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1 --#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1" -- --# Define static routes on GNU/KFreeBSD. See route(8) for syntax. --#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0 --#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0" -- --# Define static routes on other BSD systems. See route(8) for syntax. --# /etc/route.conf(5) takes precedence over this configuration. --#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1 --#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1" -+# Or define static routes on Linux using route (legacy). See route(8) for syntax. -+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1 -+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1" --- -2.33.1 - diff --git a/repo/system/openrc/0008-bootmisc-switch-wipe_tmp-setting-to-no-by-default.patch b/repo/system/openrc/0008-bootmisc-switch-wipe_tmp-setting-to-no-by-default.patch deleted file mode 100644 index f498d05..0000000 --- a/repo/system/openrc/0008-bootmisc-switch-wipe_tmp-setting-to-no-by-default.patch +++ /dev/null @@ -1,44 +0,0 @@ -From a756576ae62e4f24a2ea36e87053187cdfc1be63 Mon Sep 17 00:00:00 2001 -From: Ariadne Conill -Date: Wed, 13 Oct 2021 21:12:10 -0600 -Subject: [PATCH] bootmisc: switch wipe_tmp setting to no by default - -When wipe_tmp=yes, an insufficiently bounded rm -rf occurs that, -under specific unknown circumstances, can escape into other filesystems -resulting in data loss. - -See alpine/aports#13070. ---- - conf.d/bootmisc | 2 +- - init.d/bootmisc.in | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/conf.d/bootmisc b/conf.d/bootmisc -index dd5b08e0..5cf18d33 100644 ---- a/conf.d/bootmisc -+++ b/conf.d/bootmisc -@@ -3,7 +3,7 @@ clean_tmp_dirs="/tmp" - - # Should we wipe the tmp paths completely or just selectively remove known - # locks / files / etc... ? --wipe_tmp="YES" -+wipe_tmp="NO" - - # Write the initial dmesg log into /var/log/dmesg after boot - # This may be useful if you need the kernel boot log afterwards -diff --git a/init.d/bootmisc.in b/init.d/bootmisc.in -index b1a849a3..8485110a 100644 ---- a/init.d/bootmisc.in -+++ b/init.d/bootmisc.in -@@ -17,7 +17,7 @@ depend() - keyword -prefix -timeout - } - --: ${wipe_tmp:=${WIPE_TMP:-yes}} -+: ${wipe_tmp:=${WIPE_TMP:-no}} - : ${log_dmesg:=${LOG_DMESG:-yes}} - - cleanup_tmp_dir() --- -2.33.1 - diff --git a/repo/system/openrc/0009-fix-bootmisc-mv-error.patch b/repo/system/openrc/0009-fix-bootmisc-mv-error.patch deleted file mode 100644 index e87f9bb..0000000 --- a/repo/system/openrc/0009-fix-bootmisc-mv-error.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Dermot Bradley -Date: Sat, 29 Jan 2022 19:28 +0000 -Subject: prevent a bootmisc trying to move a nonexistant file - -During boot if the "previous_dmesg" setting is enabled in -/etc/conf.d/bootmisc then during the 1st boot of a machine the -bootmisc init.d script will attempt to move a nonexistant dmesg -file, so generating an error on the console. - -Modify the script to only move an existing file. - -Upstream has merged this as PR 496 so it will be in the next release. - ---- - -diff -aur a/init.d/bootmisc.in b/init.d/bootmisc.in ---- a/init.d/bootmisc.in -+++ b/init.d/bootmisc.in -@@ -226,7 +226,7 @@ - case "$RC_SYS" in - VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;; - *) -- if yesno ${previous_dmesg:-no}; then -+ if yesno ${previous_dmesg:-no} && [ -e /var/log/dmesg ]; then - mv /var/log/dmesg /var/log/dmesg.old - fi - dmesg > /var/log/dmesg diff --git a/repo/system/openrc/0010-noexec-devfs.patch b/repo/system/openrc/0010-noexec-devfs.patch deleted file mode 100644 index 9a8928c..0000000 --- a/repo/system/openrc/0010-noexec-devfs.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/init.d/devfs.in -+++ b/init.d/devfs.in -@@ -24,8 +24,9 @@ mount_dev() - action=--mount - conf_d_dir="${RC_SERVICE%/*/*}/conf.d" - msg=Mounting -- # Some devices require exec, Bug #92921 -- mountopts="exec,nosuid,mode=0755" -+ # Some devices require exec, https://bugs.gentoo.org/92921 -+ # Users with such requirements can use an fstab entry for /dev -+ mountopts="noexec,nosuid,mode=0755" - if yesno ${skip_mount_dev:-no} ; then - einfo "/dev will not be mounted due to user request" - return 0 diff --git a/repo/system/openrc/firstboot.initd b/repo/system/openrc/firstboot.initd deleted file mode 100644 index eac4ef8..0000000 --- a/repo/system/openrc/firstboot.initd +++ /dev/null @@ -1,34 +0,0 @@ -#!/sbin/openrc-run - -# The first boot init service - -# read kernel options -init_KOPT() { - eval "set -- $(cat /proc/cmdline 2>/dev/null)" - for opt; do - case "$opt" in - ssh_*=*) - eval "KOPT_${opt%%=*}='${opt#*=}'" ;; - esac - done -} - -start() { - rm -f /etc/runlevels/*/$RC_SVCNAME - init_KOPT - local rc=0 - ebegin "Starting ${RC_SVCNAME}" - if [ -n "$KOPT_ssh_key" ] && [ ! -f "/root/.ssh/authorized_keys" ]; then - einfo "Fetching ssh keys" - mkdir -pm 700 /root/.ssh - checkpath -fm 0600 /root/.ssh/authorized_keys - case "$KOPT_ssh_key" in - https://*|ftps://*|http://*) - wget -q "$KOPT_ssh_key" -O /root/.ssh/authorized_keys - rc=$?;; - *) echo "$KOPT_ssh_key" > /root/.ssh/authorized_keys;; - esac - fi - eend $rc -} - diff --git a/repo/system/openrc/hostname.initd b/repo/system/openrc/hostname.initd deleted file mode 100644 index 4581595..0000000 --- a/repo/system/openrc/hostname.initd +++ /dev/null @@ -1,18 +0,0 @@ -#!/sbin/openrc-run - -description="Sets the hostname of the machine." - -depend() { - keyword -prefix -lxc -docker -} - -start() { - if [ -s /etc/hostname ] ; then - name=$(cat /etc/hostname) - else - name="${hostname:-localhost}" - fi - ebegin "Setting hostname" - hostname $name - eend $? -} diff --git a/repo/system/openrc/hwdrivers.initd b/repo/system/openrc/hwdrivers.initd deleted file mode 100644 index 80184c9..0000000 --- a/repo/system/openrc/hwdrivers.initd +++ /dev/null @@ -1,32 +0,0 @@ -#!/sbin/openrc-run - -depend() { - need sysfs dev - before checkfs fsck - after modloop - keyword -vserver -lxc -} - -# Load hardware drivers -start() { - # check for boot option "nocoldplug" - if get_bootparam noautodetect; then - ewarn "Autodetection of hardware disabled from boot cmdline" - return 0 - fi - - ebegin "Loading hardware drivers" - find /sys -name modalias -type f -print0 | xargs -0 sort -u \ - | xargs modprobe -b -a 2> /dev/null - # we run it twice so we detect all devices - find /sys -name modalias -type f -print0 | xargs -0 sort -u \ - | xargs modprobe -b -a 2> /dev/null - - # check if framebuffer drivers got pulled in - if [ -e /dev/fb0 ] && ! [ -e /sys/module/fbcon ]; then - modprobe -b -q fbcon - fi - - eend 0 -} - diff --git a/repo/system/openrc/machine-id.initd b/repo/system/openrc/machine-id.initd deleted file mode 100644 index bdd0698..0000000 --- a/repo/system/openrc/machine-id.initd +++ /dev/null @@ -1,17 +0,0 @@ -#!/sbin/openrc-run - -description="Generate machine-id if needed" - -depend() { - need root dev -} - -start() { - if [ -s /etc/machine-id ] ; then - return 0 - fi - ebegin "Generating machine-id" - dd if=/dev/urandom status=none bs=16 count=1 \ - | md5sum | cut -d' ' -f1 > /etc/machine-id - eend $? -} diff --git a/repo/system/openrc/modloop.confd b/repo/system/openrc/modloop.confd deleted file mode 100644 index 6966429..0000000 --- a/repo/system/openrc/modloop.confd +++ /dev/null @@ -1,6 +0,0 @@ -# Enable loadable module support when running from RAM -# when OverlayFS support is available in the kernel. -# 0 means default tmpfs size (50% of physical RAM). -# for more information please see kernel documention at: -# https://www.kernel.org/doc/Documentation/filesystems/tmpfs.txt -overlay_size=0 diff --git a/repo/system/openrc/modloop.initd b/repo/system/openrc/modloop.initd deleted file mode 100755 index fb7006c..0000000 --- a/repo/system/openrc/modloop.initd +++ /dev/null @@ -1,153 +0,0 @@ -#!/sbin/openrc-run - -# script that will mount image with modules - -depend() { - after dev-mount - before checkfs fsck hwdrivers modules hwclock dev sysfs - keyword -vserver -lxc -} - -# read kernel options -init_KOPT() { - for opt in $(cat /proc/cmdline 2>/dev/null); do - case "$opt" in - modloop=*|modloop_verify=*) - eval "KOPT_${opt%%=*}='${opt#*=}'" ;; - esac - done -} - -mountdirs() { - awk '$2 !~ /^\/(sys|proc|dev|run)/ && $2 != "/" {print $2}' /proc/mounts -} - -find_modloop() { - local dir="$1" - local kver=$(uname -r) - local oifs="$IFS" - IFS=$'\n' - set -- $(blkid "$dir"/boot/* "$dir"/*) - IFS="$oifs" - for line; do - img=${line%%:*} - verify_modloop "$img" || eerror "Failed to verify signature of $img!" - mount "$img" -o loop,ro /.modloop || continue - if [ -d /.modloop/modules/$kver ]; then - return 0 - fi - umount /.modloop - done - return 1 -} - -verify_modloop() { - local modloop=$1 key= - if ! yesno "${KOPT_modloop_verify:=yes}"; then - return 0 - fi - for key in /etc/apk/keys/*.pub; do - local sig=/var/cache/misc/${modloop##*/}.SIGN.RSA.${key##*/} - if [ -f "$sig" ]; then - if ! command -v openssl > /dev/null; then - ewarn "Missing openssl. Modloop verification disabled!" - return 0 - fi - einfo "Verifying modloop" - openssl dgst -sha1 -verify "$key" -signature "$sig" "$modloop" \ - >/dev/null 2>&1 || return 1 - fi - done -} - -find_backing_file() { - local dir="$1" - local dev=$(df -P "$dir" | tail -1 | awk '{print $1}') - cat /sys/block/${dev#/dev/}/loop/backing_file 2>/dev/null -} - -start() { - local modloop= mount_opts= modloop_dldir="/lib" - init_KOPT - - case "$KOPT_modloop" in - none) return 0;; - http://*|https://*|ftp://*) - modloop=$modloop_dldir/${KOPT_modloop##*/} - if [ ! -f "$modloop" ]; then - mkdir -p "$modloop_dldir" - wget -P "$modloop_dldir" "$KOPT_modloop" || eend 1 - fi - ;; - *) - for dir in $(mountdirs); do - if [ -f "$dir"/$KOPT_modloop ]; then - modloop="$dir/${KOPT_modloop##/}" - alpine_mnt="$dir" - break - fi - done - ;; - esac - - ebegin "Mounting modloop $modloop" - mkdir -p /.modloop - if [ -n "$modloop" ]; then - verify_modloop "$modloop" || eerror "Failed to verify signature of $img!" - mount -o loop,ro $modloop /.modloop - eend $? || return 1 - else - for dir in $(mountdirs); do - if find_modloop "$dir"; then - alpine_mnt="$dir" - break - fi - done - if [ -d /.modloop/modules/$(uname -r) ]; then - eend 0 - else - eend 1 || return 1 - fi - fi - - #use overlayfs if available and configured - if grep -q -w "overlay$" /proc/filesystems && [ ! -z ${unionfs_size+x} ]; then - ewarn "Use of unionfs_size is deprecated use overlay_size instead" - overlay_size="$unionfs_size" - fi - if grep -q -w "overlay$" /proc/filesystems && [ -n "$overlay_size" ]; then - ebegin "OverlayFS detected, mounting modloop rw" - [ "$overlay_size" != 0 ] && mount_ops="-o size=$overlay_size" - mkdir -p /.modoverlayfs /lib/modules - mount -t tmpfs $mount_ops tmpfs /.modoverlayfs - mkdir -p /.modoverlayfs/modules /.modoverlayfs/work - mount -t overlay -o upperdir=/.modoverlayfs/modules,lowerdir=/lib/modules:/.modloop/modules,workdir=/.modoverlayfs/work overlay /lib/modules - depmod -A - eend $? || return 1 - else - rm -rf /lib/modules && ln -sf /.modloop/modules /lib/ - fi - - # copy firmware if there are any - if [ -d $alpine_mnt/firmware ]; then - ebegin "Copying firmware from $alpine_mnt/firmware" - cp -R -a $alpine_mnt/firmware /lib/ - eend $? - elif [ -d /lib/modules/firmware ]; then - rmdir /lib/firmware 2>/dev/null \ - && ln -s /lib/modules/firmware /lib/ - fi - return 0 -} - -stop() { - local ret=0 - local mnt; for mnt in /lib/modules /.modoverlayfs /.modloop; do - if mountinfo --quiet "$mnt"; then - ebegin "Unmounting $mnt" - umount -d "$mnt" || ret=1 - fi - done - eend $ret || return 1 -} - diff --git a/repo/system/openrc/modules.initd b/repo/system/openrc/modules.initd deleted file mode 100644 index 3cd141e..0000000 --- a/repo/system/openrc/modules.initd +++ /dev/null @@ -1,80 +0,0 @@ -#!/sbin/openrc-run - -description="Loads a user defined list of kernel modules." - -depend() -{ - before hwclock hwdrivers - keyword -openvz -prefix -vserver -lxc -} - -start() { - yesno $rc_verbose && verbose=yes - - ebegin "Loading modules" - eindent - for f in /lib/modules-load.d/*.conf \ - /usr/lib/modules-load.d/*.conf; do - - if ! [ -f "$f" ]; then - continue - fi - - if [ -f /etc/modules-load.d/"${f##*/}" ]; then - veinfo "Ignoring $f due to /etc/modules-load.d/${f##*/}" - continue - fi - - if [ -f /run/modules-load.d/"${f##*/}" ]; then - veinfo "Ignoring $f due to /run/modules-load.d/${f##*/}" - continue - fi - - veinfo "Processing $f" - sed -e 's/\#.*//g' -e '/^[[:space:]]*$/d' < "$f" \ - | while read module args; do - modprobe -q $module $args - done - done - - if [ -f /etc/modules ]; then - veinfo "Processing /etc/modules" - sed -e 's/\#.*//g' -e '/^[[:space:]]*$/d' < /etc/modules \ - | while read module args; do - modprobe -q $module $args - done - fi - - for f in /etc/modules-load.d/*.conf; do - if [ ! -f "$f" ]; then - continue - fi - - if [ -f /run/modules-load.d/"${f##*/}" ]; then - veinfo "Ignoring $f due to /run/modules-load.d/${f##*/}" - continue - fi - - veinfo "Processing $f" - sed -e 's/\#.*//g' -e '/^[[:space:]]*$/d' < "$f" \ - | while read module args; do - modprobe -q $module $args - done - done - - for f in /run/modules-load.d/*.conf; do - if [ ! -f "$f" ]; then - continue - fi - - veinfo "Processing $f" - sed -e 's/\#.*//g' -e '/^[[:space:]]*$/d' < "$f" \ - | while read module args; do - modprobe -q $module $args - done - done - eoutdent - - eend $? -} - diff --git a/repo/system/openrc/networking.initd b/repo/system/openrc/networking.initd deleted file mode 100644 index 417f4a3..0000000 --- a/repo/system/openrc/networking.initd +++ /dev/null @@ -1,88 +0,0 @@ -#!/sbin/openrc-run - -# note that the spoofprotect, syncoockies and ip_forward options are set in -# /etc/sysctl.conf - -: ${cfgfile:="/etc/network/interfaces"} -: ${ifquery:="ifquery"} -: ${ifstate:="/run/ifstate"} - -single_iface="${RC_SVCNAME#*.}" -if [ "$single_iface" = "$RC_SVCNAME" ]; then - single_iface= -fi - -depend() { - need localmount - want dev-settle - after bootmisc hwdrivers modules - provide net - keyword -jail -prefix -vserver -docker -} - -# find interfaces we want to start -find_ifaces() { - if [ -n "$single_iface" ]; then - echo $single_iface - return 0 - fi - - if command -v "$ifquery" >/dev/null; then - $ifquery -i "$cfgfile" --list --auto - return - fi - - # fallback in case ifquery does not exist - awk '$1 == "auto" {for (i = 2; i <= NF; i = i + 1) printf("%s ", $i)}' "$cfgfile" -} - -# return the list of interfaces we should try stop -find_running_ifaces() { - if [ -n "$single_iface" ]; then - echo $single_iface - return 0 - fi - - if command -v "$ifquery" >/dev/null; then - $ifquery --state-file $ifstate -i "$cfgfile" --running - return - fi - - # fallback - awk -F= '{print $2}' $ifstate -} - -start() { - local iface= ret=1 - ebegin "Starting networking" - eindent - for iface in $(find_ifaces); do - local r=0 - ebegin "$iface" - if ! ifup -i "$cfgfile" $iface >/dev/null; then - ifdown -i "$cfgfile" $iface >/dev/null 2>&1 - r=1 - fi - # atleast one interface needs to be started for action - # to be success - eend $r && ret=0 - done - eoutdent - return $ret -} - -stop() { - local iface= - # Don't stop the network at shutdown. - yesno ${keep_network:-YES} && yesno $RC_GOINGDOWN && return 0 - - ebegin "Stopping networking" - eindent - for iface in $(find_running_ifaces); do - ebegin "$iface" - ifdown -i "$cfgfile" -f $iface >/dev/null - eend $? - done - eoutdent - return 0 -} diff --git a/repo/system/openrc/openrc.logrotate b/repo/system/openrc/openrc.logrotate deleted file mode 100644 index 5e5e64b..0000000 --- a/repo/system/openrc/openrc.logrotate +++ /dev/null @@ -1,4 +0,0 @@ -/var/log/rc.log { - missingok - notifempty -} diff --git a/repo/system/openrc/openrc.post-install b/repo/system/openrc/openrc.post-install deleted file mode 100644 index 1c27350..0000000 --- a/repo/system/openrc/openrc.post-install +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/sh - -rc_update() { - local svc="$1" - local level="$2" - mkdir -p /etc/runlevels/$level - ln -sf /etc/init.d/$svc /etc/runlevels/$level -} - -if [ ! -d etc/rcS.d ] && [ ! -d etc/rcL.d ]; then - exit 0 -fi - -for i in etc/rc[SL].d/*; do - [ -L "$i" ] || continue - oldsvc=${i##*/S[0-9][0-9]} - # some services are renamed - case "$oldsvc" in - modutils) svc=modules;; - procps) svc=sysctl;; - bootmisc.sh) svc=bootmisc;; - keymap) svc=keymaps;; - rc.local) svc=local;; - *) svc=$oldsvc;; - esac - - # add the service to correct "runlevel" - case "$svc" in - syslog|klogd) - rc_update $svc sysinit;; - hwclock|modules|sysctl|hostname|keymaps|bootmisc) - rc_update $svc boot;; - *) rc_update $svc default;; - esac - - rm $i -done - diff --git a/repo/system/openrc/openrc.post-upgrade b/repo/system/openrc/openrc.post-upgrade deleted file mode 100644 index 8884202..0000000 --- a/repo/system/openrc/openrc.post-upgrade +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh - -# in 0.8.0-r1 the state dir moved from /libexec/rc/init.d to /lib/rc/init.d -# and with 0.10 it moved to /run/openrc - -mkdir -p /run/openrc -for dir in /libexec /lib; do - [ -d $dir/rc/init.d ] || continue - - for i in $dir/rc/init.d/* ; do - [ -e "$i" ] || continue - if [ -e /run/openrc/${i##*/} ]; then - rm -r $i - else - mv $i /run/openrc/ - fi - done - - rmdir $dir/rc/init.d $dir/rc /libexec 2>/dev/null -done - -# create rc.local compat -if [ -f /etc/rc.local ]; then - cat >/etc/local.d/rc.local-compat.start<<__EOF__ -#!/bin/sh - -# this is only here for compatibility reasons -if [ -f /etc/rc.local ]; then - . /etc/rc.local -fi -__EOF__ - chmod +x /etc/local.d/rc.local-compat.start -fi - -exit 0 diff --git a/repo/system/openrc/openrc.xibuild b/repo/system/openrc/openrc.xibuild deleted file mode 100644 index fb99da4..0000000 --- a/repo/system/openrc/openrc.xibuild +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh - -MAKEDEPS="make " -DEPS="ifupdown-ng sbase musl" - -PKG_VER=0.44.10 -SOURCE=https://github.com/OpenRC/openrc/archive/refs/tags/$PKG_VER.zip -ADDITIONAL=" - 0001-call-sbin-mkmntdirs-in-localmount-OpenRC-service.patch - 0002-fsck-don-t-add-C0-to-busybox-fsck.patch - 0003-rc-pull-in-sysinit-and-boot-as-stacked-levels-when-n.patch - 0004-make-consolefont-service-compatible-with-busyboxs-se.patch - 0005-Support-early-loading-of-keymap-if-kbd-is-installed.patch - 0006-Add-support-for-starting-services-in-a-specified-VRF.patch - 0007-Clean-up-staticroute-config-remove-irrelevant-parts-.patch - 0008-bootmisc-switch-wipe_tmp-setting-to-no-by-default.patch - 0009-fix-bootmisc-mv-error.patch - 0010-noexec-devfs.patch - seedrng.patch - openrc.logrotate - hostname.initd - hwdrivers.initd - modules.initd - modloop.initd - networking.initd - modloop.confd - sysfsconf.initd - firstboot.initd - sysctl.initd - machine-id.initd - test-networking.sh - rc.conf -" - -DESC="Dependency based init system that works with sysvinit" - -# build borrowed from alpine linux -prepare () { - apply_patches - sed -i -e '/^sed/d' pkgconfig/Makefile - find ./ -name "Makefile" | xargs sed -i 's/ln -snf/ln -sf/g' -} - -build () { - export MKZSHCOMP=yes - export MKBASHCOMP=yes - make LIBDIR=/lib LIBEXECDIR=/lib/rc MKSYSVINIT=yes -} - -check () { - make check -} - -package () { - make LIBEXECDIR=/lib/rc DESTDIR="$PKG_DEST/" MKSYSVINIT=yes install - - # remove -n from ln in mtab, devfs - sed -i "s/ln -snf/ln -sf/g" $PKG_DEST/etc/init.d/mtab $PKG_DEST/etc/init.d/devfs - - ln -s openrc-init $PKG_DEST/sbin/init - - # we still use our ifup/ifdown based net config - #rm -f "$PKG_DEST"/etc/conf.d/network "$PKG_DEST"/etc/init.d/network - - # our hostname init script reads hostname from /etc/hostname - rm -f "$pkgdir"/etc/conf.d/hostname - - - # we override some of the scripts - for i in *.initd; do - j=${i##*/} - install -Dm755 $i "$PKG_DEST"/etc/init.d/${j%.initd} - done - - # we override some of the conf.d files - for i in *.confd; do - j=${i##*/} - install -Dm644 $i "$PKG_DEST"/etc/conf.d/${j%.confd} - done - - # additional documentation considered useful - mkdir -p "$PKG_DEST"/usr/share/doc/openrc/ - install -m644 ChangeLog ./*.md "$PKG_DEST"/usr/share/doc/openrc/ - - # we use a virtual keymaps services to allow users to set their - # keymaps either with the OpenRC loadkeys service provided by - # the kbd aport or with the loadkmap service provided by the - # busybox-initscripts aport. - rm -f "$PKG_DEST/etc/init.d/keymaps" \ - "$PKG_DEST/etc/conf.d/keymaps" - - install -Dm644 openrc.logrotate $PKG_DEST/etc/logrotate.d/openrc - install -d "$PKG_DEST"/etc/local.d "$PKG_DEST"/run - - # openrc upstream removed service(8) for whatever reason, put it back - ln -s /sbin/rc-service $PKG_DEST/sbin/service - - # remove deprecated /sbin/runscript to avoid conflict with minicom - rm $PKG_DEST/sbin/runscript - - #spawn ttys - for x in tty1 tty2 tty3 tty4 tty5 tty6; do - ln -sf agetty $PKG_DEST/etc/init.d/agetty.$x - done - - rm $PKG_DEST/etc/rc.conf - install -m644 rc.conf $PKG_DEST/etc/rc.conf -} - -postinstall () { - mkdir -p /run/openrc - for dir in /libexec /lib; do - [ -d $dir/rc/init.d ] || continue - - for i in $dir/rc/init.d/* ; do - [ -e "$i" ] || continue - if [ -e /run/openrc/${i##*/} ]; then - rm -r $i - else - mv $i /run/openrc/ - fi - done - - rmdir $dir/rc/init.d $dir/rc /libexec 2>/dev/null - done - - # create rc.local compat - if [ -f /etc/rc.local ]; then - cat >/etc/local.d/rc.local-compat.start<< EOF -#!/bin/sh - -# this is only here for compatibility reasons -if [ -f /etc/rc.local ]; then - . /etc/rc.local -fi -EOF - chmod +x /etc/local.d/rc.local-compat.start - fi -} diff --git a/repo/system/openrc/rc.conf b/repo/system/openrc/rc.conf deleted file mode 100644 index fdeb653..0000000 --- a/repo/system/openrc/rc.conf +++ /dev/null @@ -1,313 +0,0 @@ -# Global OpenRC configuration settings - -# Set to "YES" if you want the rc system to try and start services -# in parallel for a slight speed improvement. When running in parallel we -# prefix the service output with its name as the output will get -# jumbled up. -# WARNING: whilst we have improved parallel, it can still potentially lock -# the boot process. Don't file bugs about this unless you can supply -# patches that fix it without breaking other things! -rc_parallel="YES" - -# Set rc_interactive to "YES" and you'll be able to press the I key during -# boot so you can choose to start specific services. Set to "NO" to disable -# this feature. This feature is automatically disabled if rc_parallel is -# set to YES. -#rc_interactive="YES" - -# If we need to drop to a shell, you can specify it here. -# If not specified we use $SHELL, otherwise the one specified in /etc/passwd, -# otherwise /bin/sh -# Linux users could specify /sbin/sulogin -rc_shell=/bin/sh - -# Do we allow any started service in the runlevel to satisfy the dependency -# or do we want all of them regardless of state? For example, if net.eth0 -# and net.eth1 are in the default runlevel then with rc_depend_strict="NO" -# both will be started, but services that depend on 'net' will work if either -# one comes up. With rc_depend_strict="YES" we would require them both to -# come up. -#rc_depend_strict="YES" - -# rc_hotplug controls which services we allow to be hotplugged. -# A hotplugged service is one started by a dynamic dev manager when a matching -# hardware device is found. -# Hotplugged services appear in the "hotplugged" runlevel. -# If rc_hotplug is set to any value, we compare the name of this service -# to every pattern in the value, from left to right, and we allow the -# service to be hotplugged if it matches a pattern, or if it matches no -# patterns. Patterns can include shell wildcards. -# To disable services from being hotplugged, prefix patterns with "!". -#If rc_hotplug is not set or is empty, all hotplugging is disabled. -# Example - rc_hotplug="net.wlan !net.*" -# This allows net.wlan and any service not matching net.* to be hotplugged. -# Example - rc_hotplug="!net.*" -# This allows services that do not match "net.*" to be hotplugged. - -# rc_logger launches a logging daemon to log the entire rc process to -# /var/log/rc.log -# NOTE: Linux systems require the devfs service to be started before -# logging can take place and as such cannot log the sysinit runlevel. -#rc_logger="NO" - -# Through rc_log_path you can specify a custom log file. -# The default value is: /var/log/rc.log -#rc_log_path="/var/log/rc.log" - -# If you want verbose output for OpenRC, set this to yes. If you want -# verbose output for service foo only, set it to yes in /etc/conf.d/foo. -#rc_verbose=no - -# By default we filter the environment for our running scripts. To allow other -# variables through, add them here. Use a * to allow all variables through. -#rc_env_allow="VAR1 VAR2" - -# By default we assume that all daemons will start correctly. -# However, some do not - a classic example is that they fork and return 0 AND -# then child barfs on a configuration error. Or the daemon has a bug and the -# child crashes. You can set the number of milliseconds start-stop-daemon -# waits to check that the daemon is still running after starting here. -# The default is 0 - no checking. -#rc_start_wait=100 - -# rc_nostop is a list of services which will not stop when changing runlevels. -# This still allows the service itself to be stopped when called directly. -#rc_nostop="" - -# rc will attempt to start crashed services by default. -# However, it will not stop them by default as that could bring down other -# critical services. -#rc_crashed_stop=NO -#rc_crashed_start=YES - -# Set rc_nocolor to yes if you do not want colors displayed in OpenRC -# output. -#rc_nocolor=NO - -############################################################################## -# MISC CONFIGURATION VARIABLES -# There variables are shared between many init scripts - -# Set unicode to YES to turn on unicode support for keyboards and screens. -unicode="YES" - -# This is how long fuser should wait for a remote server to respond. The -# default is 60 seconds, but it can be adjusted here. -#rc_fuser_timeout=60 - -# Below is the default list of network fstypes. -# -# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs -# nfs nfs4 ocfs2 shfs smbfs -# -# If you would like to add to this list, you can do so by adding your -# own fstypes to the following variable. -#extra_net_fs_list="" - -############################################################################## -# SERVICE CONFIGURATION VARIABLES -# These variables are documented here, but should be configured in -# /etc/conf.d/foo for service foo and NOT enabled here unless you -# really want them to work on a global basis. -# If your service has characters in its name which are not legal in -# shell variable names and you configure the variables for it in this -# file, those characters should be replaced with underscores in the -# variable names as shown below. - -# Some daemons are started and stopped via start-stop-daemon. -# We can set some things on a per service basis, like the nicelevel. -#SSD_NICELEVEL="-19" -# Or the ionice level. The format is class[:data] , just like the -# --ionice start-stop-daemon parameter. -#SSD_IONICELEVEL="2:2" - -# Pass ulimit parameters -# If you are using bash in POSIX mode for your shell, note that the -# ulimit command uses a block size of 512 bytes for the -c and -f -# options -#rc_ulimit="-u 30" - -# It's possible to define extra dependencies for services like so -#rc_config="/etc/foo" -#rc_need="openvpn" -#rc_use="net.eth0" -#rc_after="clock" -#rc_before="local" -#rc_provide="!net" - -# You can also enable the above commands here for each service. Below is an -# example for service foo. -#rc_foo_config="/etc/foo" -#rc_foo_need="openvpn" -#rc_foo_after="clock" - -# Below is an example for service foo-bar. Note that the '-' is illegal -# in a shell variable name, so we convert it to an underscore. -# example for service foo-bar. -#rc_foo_bar_config="/etc/foo-bar" -#rc_foo_bar_need="openvpn" -#rc_foo_bar_after="clock" - -# You can also remove dependencies. -# This is mainly used for saying which services do NOT provide net. -#rc_net_tap0_provide="!net" - -# This is the subsystem type. -# It is used to match against keywords set by the keyword call in the -# depend function of service scripts. -# -# It should be set to the value representing the environment this file is -# PRESENTLY in, not the virtualization the environment is capable of. -# If it is commented out, automatic detection will be used. -# -# The list below shows all possible settings as well as the host -# operating systems where they can be used and autodetected. -# -# "" - nothing special -# "docker" - Docker container manager (Linux) -# "jail" - Jail (DragonflyBSD or FreeBSD) -# "lxc" - Linux Containers -# "openvz" - Linux OpenVZ -# "prefix" - Prefix -# "rkt" - CoreOS container management system (Linux) -# "subhurd" - Hurd subhurds (to be checked) -# "systemd-nspawn" - Container created by systemd-nspawn (Linux) -# "uml" - Usermode Linux -# "vserver" - Linux vserver -# "xen0" - Xen0 Domain (Linux and NetBSD) -# "xenU" - XenU Domain (Linux and NetBSD) -#rc_sys="" - -# if you use openrc-init, which is currently only available on Linux, -# this is the default runlevel to activate after "sysinit" and "boot" -# when booting. -#rc_default_runlevel="default" - -# on Linux and Hurd, this is the number of ttys allocated for logins -# It is used in the consolefont, keymaps, numlock and termencoding -# service scripts. -rc_tty_number=12 - -############################################################################## -# LINUX CGROUPS RESOURCE MANAGEMENT - -# This sets the mode used to mount cgroups. -# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and -# cgroups version 1 on /sys/fs/cgroup. -# "legacy" mounts cgroups version 1 on /sys/fs/cgroup -# "unified" mounts cgroups version 2 on /sys/fs/cgroup -#rc_cgroup_mode="hybrid" - -# This is a list of controllers which should be enabled for cgroups version 2 -# when hybrid mode is being used. -# Controllers listed here will not be available for cgroups version 1. -#rc_cgroup_controllers="" - -# This variable contains the cgroups version 2 settings for your services. -# If this is set in this file, the settings will apply to all services. -# If you want different settings for each service, place the settings in -# /etc/conf.d/foo for service foo. -# The format is to specify the setting and value followed by a newline. -# Multiple settings and values can be specified. -# For example, you would use this to set the maximum memory and maximum -# number of pids for a service. -#rc_cgroup_settings=" -#memory.max 10485760 -#pids.max max -#" -# -# For more information about the adjustments that can be made with -# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel -# source tree. -#rc_cgroup_settings="" - -# This switch controls whether or not cgroups version 1 controllers are -# individually mounted under -# /sys/fs/cgroup in hybrid or legacy mode. -#rc_controller_cgroups="YES" - -# The following setting turns on the memory.use_hierarchy setting in the -# root memory cgroup for cgroups v1. -# It must be set to yes in this file if you want this functionality. -#rc_cgroup_memory_use_hierarchy="NO" - -# The following settings allow you to set up values for the cgroups version 1 -# controllers for your services. -# They can be set in this file;, however, if you do this, the settings -# will apply to all of your services. -# If you want different settings for each service, place the settings in -# /etc/conf.d/foo for service foo. -# The format is to specify the names of the settings followed by their -# values. Each variable can hold multiple settings. -# For example, you would use this to set the cpu.shares setting in the -# cpu controller to 512 for your service. -# rc_cgroup_cpu=" -# cpu.shares 512 -# " -# -# For more information about the adjustments that can be made with -# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel -# source tree. - -# Set the blkio controller settings for this service. -#rc_cgroup_blkio="" - -# Set the cpu controller settings for this service. -#rc_cgroup_cpu="" - -# Add this service to the cpuacct controller (any value means yes). -#rc_cgroup_cpuacct="" - -# Set the cpuset controller settings for this service. -#rc_cgroup_cpuset="" - -# Set the devices controller settings for this service. -#rc_cgroup_devices="" - -# Set the hugetlb controller settings for this service. -#rc_cgroup_hugetlb="" - -# Set the memory controller settings for this service. -#rc_cgroup_memory="" - -# Set the net_cls controller settings for this service. -#rc_cgroup_net_cls="" - -# Set the net_prio controller settings for this service. -#rc_cgroup_net_prio="" - -# Set the pids controller settings for this service. -#rc_cgroup_pids="" - -# Set this to YES if you want all of the processes in a service's cgroup -# killed when the service is stopped or restarted. -# Be aware that setting this to yes means all of a service's -# child processes will be killed. Keep this in mind if you set this to -# yes here instead of for the individual services in -# /etc/conf.d/. -# To perform this cleanup manually for a stopped service, you can -# execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or -# rc-service cgroup_cleanup. -# The process followed in this cleanup is the following: -# 1. send stopsig (sigterm if it isn't set) to all processes left in the -# cgroup immediately followed by sigcont. -# 2. Send sighup to all processes in the cgroup if rc_send_sighup is -# yes. -# 3. delay for rc_timeout_stopsec seconds. -# 4. send sigkill to all processes in the cgroup unless disabled by -# setting rc_send_sigkill to no. -# rc_cgroup_cleanup="NO" - -# If this is yes, we will send sighup to the processes in the cgroup -# immediately after stopsig and sigcont. -#rc_send_sighup="NO" - -# This is the amount of time in seconds that we delay after sending sigcont -# and optionally sighup, before we optionally send sigkill to all -# processes in the # cgroup. -# The default is 90 seconds. -#rc_timeout_stopsec="90" - -# If this is set to no, we do not send sigkill to all processes in the -# cgroup. -#rc_send_sigkill="YES" diff --git a/repo/system/openrc/seedrng.patch b/repo/system/openrc/seedrng.patch deleted file mode 100644 index ff61d81..0000000 --- a/repo/system/openrc/seedrng.patch +++ /dev/null @@ -1,640 +0,0 @@ -From 076c2552aeff88a27fe275dfaae61dedf4bb4bd5 Mon Sep 17 00:00:00 2001 -From: "Jason A. Donenfeld" -Date: Thu, 24 Mar 2022 22:07:16 -0600 -Subject: [PATCH] Use seedrng for seeding the random number generator - -The RNG can't actually be seeded from a shell script, due to the -reliance on ioctls. For this reason, the seedrng project provides a -basic script meant to be copy and pasted into projects like OpenRC and -tweaked as needed: https://git.zx2c4.com/seedrng/about/ - -This commit imports it into OpenRC and wires up /etc/init.d/urandom to -call it. It shouldn't be called by other things on the system, so it -lives in rc_sbindir. - -Closes #506. -Closes #507. - -Signed-off-by: Jason A. Donenfeld ---- - AUTHORS | 1 + - conf.d/urandom | 9 +- - init.d/urandom.in | 41 ++-- - src/rc/Makefile | 6 +- - src/rc/meson.build | 10 +- - src/rc/seedrng.c | 453 +++++++++++++++++++++++++++++++++++++++++++++ - 6 files changed, 499 insertions(+), 21 deletions(-) - create mode 100644 src/rc/seedrng.c - -diff --git a/AUTHORS b/AUTHORS -index 0616d5175..ede0f471b 100644 ---- a/AUTHORS -+++ b/AUTHORS -@@ -43,6 +43,7 @@ Ian Stakenvicius - Jakob Drexel - James Le Cuirot - Jan Psota -+Jason A. Donenfeld - Jason Zaman - Joe Harvell - Joe M -diff --git a/conf.d/urandom b/conf.d/urandom -index f721a2491..744e4f702 100644 ---- a/conf.d/urandom -+++ b/conf.d/urandom -@@ -2,4 +2,11 @@ - # (say for crypt swap), so you will need to customize this - # behavior. If you have /var on a separate partition, then - # make sure this path lives on your root device somewhere. --urandom_seed="/var/lib/misc/random-seed" -+seed_dir="/var/lib/seedrng" -+lock_file="/var/run/seedrng.lock" -+ -+# Set this to true if you do not want seed files to actually -+# credit the RNG. Set this if you plan to replicate this -+# file system image and do not have the wherewithal to first -+# delete the contents of /var/lib/seedrng. -+skip_credit="false" -diff --git a/init.d/urandom.in b/init.d/urandom.in -index 0d6ab66e0..cda431fdb 100644 ---- a/init.d/urandom.in -+++ b/init.d/urandom.in -@@ -1,5 +1,5 @@ - #!@SBINDIR@/openrc-run --# Copyright (c) 2007-2015 The OpenRC Authors. -+# Copyright (c) 2007-2022 The OpenRC Authors. - # See the Authors file at the top-level directory of this distribution and - # https://github.com/OpenRC/openrc/blob/HEAD/AUTHORS - # -@@ -9,7 +9,10 @@ - # This file may not be copied, modified, propagated, or distributed - # except according to the terms contained in the LICENSE file. - --: ${urandom_seed:=${URANDOM_SEED:-/var/lib/misc/random-seed}} -+export SEEDRNG_SEED_DIR="${seed_dir:-/var/lib/seedrng}" -+export SEEDRNG_LOCK_FILE="${lock_file:-/var/run/seedrng.lock}" -+export SEEDRNG_SKIP_CREDIT="${skip_credit:-false}" -+: ${urandom_seed:=${SEEDRNG_SEED_DIR}/../misc/random-seed} - description="Initializes the random number generator." - - depend() -@@ -21,33 +24,35 @@ depend() - - save_seed() - { -- local psz=1 -- -- if [ -e /proc/sys/kernel/random/poolsize ]; then -- : $(( psz = $(cat /proc/sys/kernel/random/poolsize) / 4096 )) -- fi -- - ( # sub shell to prevent umask pollution - umask 077 -- dd if=/dev/urandom of="$urandom_seed" count=${psz} 2>/dev/null -+ dd if=/dev/urandom of="$urandom_seed" count=1 2>/dev/null - ) - } - - start() - { -- [ -c /dev/urandom ] || return -- if [ -f "$urandom_seed" ]; then -- ebegin "Initializing random number generator" -- cat "$urandom_seed" > /dev/urandom -- eend $? "Error initializing random number generator" -+ if [ "$RC_UNAME" = Linux ]; then -+ seedrng -+ else -+ [ -c /dev/urandom ] || return -+ if [ -f "$urandom_seed" ]; then -+ ebegin "Initializing random number generator" -+ cat "$urandom_seed" > /dev/urandom -+ eend $? "Error initializing random number generator" -+ fi -+ rm -f "$urandom_seed" && save_seed - fi -- rm -f "$urandom_seed" && save_seed - return 0 - } - - stop() - { -- ebegin "Saving random seed" -- save_seed -- eend $? "Failed to save random seed" -+ if [ "$RC_UNAME" = Linux ]; then -+ seedrng -+ else -+ ebegin "Saving random seed" -+ save_seed -+ eend $? "Failed to save random seed" -+ fi - } -diff --git a/src/rc/Makefile b/src/rc/Makefile -index fd796d920..62539f134 100644 ---- a/src/rc/Makefile -+++ b/src/rc/Makefile -@@ -15,7 +15,7 @@ endif - - ifeq (${OS},Linux) - SRCS+= kill_all.c openrc-init.c openrc-shutdown.c rc-sysvinit.c broadcast.c \ -- rc-wtmp.c -+ rc-wtmp.c seedrng.c - endif - - CLEANFILES= version.h rc-selinux.o -@@ -47,6 +47,7 @@ RC_SBINPROGS= mark_service_starting mark_service_started \ - - ifeq (${OS},Linux) - RC_BINPROGS+= kill_all -+RC_SBINPROGS+= seedrng - SBINPROGS+= openrc-init openrc-shutdown - endif - -@@ -180,3 +181,6 @@ shell_var: shell_var.o - - swclock: swclock.o _usage.o rc-misc.o - ${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD} -+ -+seedrng: seedrng.o -+ ${CC} ${LOCAL_CFLAGS} ${LOCAL_LDFLAGS} ${CFLAGS} ${LDFLAGS} -o $@ $^ ${LDADD} -diff --git a/src/rc/meson.build b/src/rc/meson.build -index 8fdf3ac3b..b724c51f2 100644 ---- a/src/rc/meson.build -+++ b/src/rc/meson.build -@@ -268,7 +268,15 @@ if os == 'Linux' - link_with: [libeinfo,librc], - install: true, - install_dir: rc_bindir) -- endif -+ -+ executable('seedrng', -+ ['seedrng.c'], -+ c_args : cc_branding_flags, -+ include_directories: [incdir, einfo_incdir, rc_incdir], -+ link_with: [libeinfo, librc], -+ install: true, -+ install_dir: rc_sbindir) -+endif - - executable('shell_var', - ['shell_var.c'], -diff --git a/src/rc/seedrng.c b/src/rc/seedrng.c -new file mode 100644 -index 000000000..c1f941457 ---- /dev/null -+++ b/src/rc/seedrng.c -@@ -0,0 +1,453 @@ -+/* -+ * seedrng.c -+ * Seed kernel RNG from seed file, based on code from: -+ * https://git.zx2c4.com/seedrng/about/ -+ */ -+ -+/* -+ * Copyright (c) 2022 The OpenRC Authors. -+ * See the Authors file at the top-level directory of this distribution and -+ * https://github.com/OpenRC/openrc/blob/HEAD/AUTHORS -+ * -+ * This file is part of OpenRC. It is subject to the license terms in -+ * the LICENSE file found in the top-level directory of this -+ * distribution and at https://github.com/OpenRC/openrc/blob/HEAD/LICENSE -+ * This file may not be copied, modified, propagated, or distributed -+ * except according to the terms contained in the LICENSE file. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "rc.h" -+#include "einfo.h" -+#include "helpers.h" -+ -+#ifndef GRND_INSECURE -+#define GRND_INSECURE 0x0004 /* Apparently some headers don't ship with this yet. */ -+#endif -+ -+static const char *SEED_DIR; -+static const char *LOCK_FILE; -+static char *CREDITABLE_SEED; -+static char *NON_CREDITABLE_SEED; -+ -+enum blake2s_lengths { -+ BLAKE2S_BLOCK_LEN = 64, -+ BLAKE2S_HASH_LEN = 32, -+ BLAKE2S_KEY_LEN = 32 -+}; -+ -+enum seedrng_lengths { -+ MAX_SEED_LEN = 512, -+ MIN_SEED_LEN = BLAKE2S_HASH_LEN -+}; -+ -+struct blake2s_state { -+ uint32_t h[8]; -+ uint32_t t[2]; -+ uint32_t f[2]; -+ uint8_t buf[BLAKE2S_BLOCK_LEN]; -+ unsigned int buflen; -+ unsigned int outlen; -+}; -+ -+#define le32_to_cpup(a) le32toh(*(a)) -+#define cpu_to_le32(a) htole32(a) -+#ifndef ARRAY_SIZE -+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -+#endif -+#ifndef DIV_ROUND_UP -+#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) -+#endif -+ -+static inline void cpu_to_le32_array(uint32_t *buf, unsigned int words) -+{ -+ while (words--) { -+ *buf = cpu_to_le32(*buf); -+ ++buf; -+ } -+} -+ -+static inline void le32_to_cpu_array(uint32_t *buf, unsigned int words) -+{ -+ while (words--) { -+ *buf = le32_to_cpup(buf); -+ ++buf; -+ } -+} -+ -+static inline uint32_t ror32(uint32_t word, unsigned int shift) -+{ -+ return (word >> (shift & 31)) | (word << ((-shift) & 31)); -+} -+ -+static const uint32_t blake2s_iv[8] = { -+ 0x6A09E667UL, 0xBB67AE85UL, 0x3C6EF372UL, 0xA54FF53AUL, -+ 0x510E527FUL, 0x9B05688CUL, 0x1F83D9ABUL, 0x5BE0CD19UL -+}; -+ -+static const uint8_t blake2s_sigma[10][16] = { -+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 }, -+ { 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 }, -+ { 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4 }, -+ { 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8 }, -+ { 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13 }, -+ { 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9 }, -+ { 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11 }, -+ { 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10 }, -+ { 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5 }, -+ { 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0 }, -+}; -+ -+static void blake2s_set_lastblock(struct blake2s_state *state) -+{ -+ state->f[0] = -1; -+} -+ -+static void blake2s_increment_counter(struct blake2s_state *state, const uint32_t inc) -+{ -+ state->t[0] += inc; -+ state->t[1] += (state->t[0] < inc); -+} -+ -+static void blake2s_init_param(struct blake2s_state *state, const uint32_t param) -+{ -+ int i; -+ -+ memset(state, 0, sizeof(*state)); -+ for (i = 0; i < 8; ++i) -+ state->h[i] = blake2s_iv[i]; -+ state->h[0] ^= param; -+} -+ -+static void blake2s_init(struct blake2s_state *state, const size_t outlen) -+{ -+ blake2s_init_param(state, 0x01010000 | outlen); -+ state->outlen = outlen; -+} -+ -+static void blake2s_compress(struct blake2s_state *state, const uint8_t *block, size_t nblocks, const uint32_t inc) -+{ -+ uint32_t m[16]; -+ uint32_t v[16]; -+ int i; -+ -+ while (nblocks > 0) { -+ blake2s_increment_counter(state, inc); -+ memcpy(m, block, BLAKE2S_BLOCK_LEN); -+ le32_to_cpu_array(m, ARRAY_SIZE(m)); -+ memcpy(v, state->h, 32); -+ v[ 8] = blake2s_iv[0]; -+ v[ 9] = blake2s_iv[1]; -+ v[10] = blake2s_iv[2]; -+ v[11] = blake2s_iv[3]; -+ v[12] = blake2s_iv[4] ^ state->t[0]; -+ v[13] = blake2s_iv[5] ^ state->t[1]; -+ v[14] = blake2s_iv[6] ^ state->f[0]; -+ v[15] = blake2s_iv[7] ^ state->f[1]; -+ -+#define G(r, i, a, b, c, d) do { \ -+ a += b + m[blake2s_sigma[r][2 * i + 0]]; \ -+ d = ror32(d ^ a, 16); \ -+ c += d; \ -+ b = ror32(b ^ c, 12); \ -+ a += b + m[blake2s_sigma[r][2 * i + 1]]; \ -+ d = ror32(d ^ a, 8); \ -+ c += d; \ -+ b = ror32(b ^ c, 7); \ -+} while (0) -+ -+#define ROUND(r) do { \ -+ G(r, 0, v[0], v[ 4], v[ 8], v[12]); \ -+ G(r, 1, v[1], v[ 5], v[ 9], v[13]); \ -+ G(r, 2, v[2], v[ 6], v[10], v[14]); \ -+ G(r, 3, v[3], v[ 7], v[11], v[15]); \ -+ G(r, 4, v[0], v[ 5], v[10], v[15]); \ -+ G(r, 5, v[1], v[ 6], v[11], v[12]); \ -+ G(r, 6, v[2], v[ 7], v[ 8], v[13]); \ -+ G(r, 7, v[3], v[ 4], v[ 9], v[14]); \ -+} while (0) -+ ROUND(0); -+ ROUND(1); -+ ROUND(2); -+ ROUND(3); -+ ROUND(4); -+ ROUND(5); -+ ROUND(6); -+ ROUND(7); -+ ROUND(8); -+ ROUND(9); -+ -+#undef G -+#undef ROUND -+ -+ for (i = 0; i < 8; ++i) -+ state->h[i] ^= v[i] ^ v[i + 8]; -+ -+ block += BLAKE2S_BLOCK_LEN; -+ --nblocks; -+ } -+} -+ -+static void blake2s_update(struct blake2s_state *state, const void *inp, size_t inlen) -+{ -+ const size_t fill = BLAKE2S_BLOCK_LEN - state->buflen; -+ const uint8_t *in = inp; -+ -+ if (!inlen) -+ return; -+ if (inlen > fill) { -+ memcpy(state->buf + state->buflen, in, fill); -+ blake2s_compress(state, state->buf, 1, BLAKE2S_BLOCK_LEN); -+ state->buflen = 0; -+ in += fill; -+ inlen -= fill; -+ } -+ if (inlen > BLAKE2S_BLOCK_LEN) { -+ const size_t nblocks = DIV_ROUND_UP(inlen, BLAKE2S_BLOCK_LEN); -+ blake2s_compress(state, in, nblocks - 1, BLAKE2S_BLOCK_LEN); -+ in += BLAKE2S_BLOCK_LEN * (nblocks - 1); -+ inlen -= BLAKE2S_BLOCK_LEN * (nblocks - 1); -+ } -+ memcpy(state->buf + state->buflen, in, inlen); -+ state->buflen += inlen; -+} -+ -+static void blake2s_final(struct blake2s_state *state, uint8_t *out) -+{ -+ blake2s_set_lastblock(state); -+ memset(state->buf + state->buflen, 0, BLAKE2S_BLOCK_LEN - state->buflen); -+ blake2s_compress(state, state->buf, 1, state->buflen); -+ cpu_to_le32_array(state->h, ARRAY_SIZE(state->h)); -+ memcpy(out, state->h, state->outlen); -+} -+ -+static size_t determine_optimal_seed_len(void) -+{ -+ size_t ret = 0; -+ char poolsize_str[11] = { 0 }; -+ int fd = open("/proc/sys/kernel/random/poolsize", O_RDONLY); -+ -+ if (fd < 0 || read(fd, poolsize_str, sizeof(poolsize_str) - 1) < 0) { -+ ewarn("Unable to determine pool size, falling back to %u bits: %s", MIN_SEED_LEN * 8, strerror(errno)); -+ ret = MIN_SEED_LEN; -+ } else -+ ret = DIV_ROUND_UP(strtoul(poolsize_str, NULL, 10), 8); -+ if (fd >= 0) -+ close(fd); -+ if (ret < MIN_SEED_LEN) -+ ret = MIN_SEED_LEN; -+ else if (ret > MAX_SEED_LEN) -+ ret = MAX_SEED_LEN; -+ return ret; -+} -+ -+static int read_new_seed(uint8_t *seed, size_t len, bool *is_creditable) -+{ -+ ssize_t ret; -+ int urandom_fd; -+ -+ *is_creditable = false; -+ ret = getrandom(seed, len, GRND_NONBLOCK); -+ if (ret == (ssize_t)len) { -+ *is_creditable = true; -+ return 0; -+ } -+ if (ret == -1 && errno == ENOSYS) { -+ struct pollfd random_fd = { -+ .fd = open("/dev/random", O_RDONLY), -+ .events = POLLIN -+ }; -+ if (random_fd.fd < 0) -+ return -errno; -+ *is_creditable = poll(&random_fd, 1, 0) == 1; -+ close(random_fd.fd); -+ } else if (getrandom(seed, len, GRND_INSECURE) == (ssize_t)len) -+ return 0; -+ urandom_fd = open("/dev/urandom", O_RDONLY); -+ if (urandom_fd < 0) -+ return -errno; -+ ret = read(urandom_fd, seed, len); -+ if (ret == (ssize_t)len) -+ ret = 0; -+ else -+ ret = -errno ? -errno : -EIO; -+ close(urandom_fd); -+ return ret; -+} -+ -+static int seed_rng(uint8_t *seed, size_t len, bool credit) -+{ -+ struct { -+ int entropy_count; -+ int buf_size; -+ uint8_t buffer[MAX_SEED_LEN]; -+ } req = { -+ .entropy_count = credit ? len * 8 : 0, -+ .buf_size = len -+ }; -+ int random_fd, ret; -+ -+ if (len > sizeof(req.buffer)) -+ return -EFBIG; -+ memcpy(req.buffer, seed, len); -+ -+ random_fd = open("/dev/random", O_RDWR); -+ if (random_fd < 0) -+ return -errno; -+ ret = ioctl(random_fd, RNDADDENTROPY, &req); -+ if (ret) -+ ret = -errno ? -errno : -EIO; -+ close(random_fd); -+ return ret; -+} -+ -+static int seed_from_file_if_exists(const char *filename, bool credit, struct blake2s_state *hash) -+{ -+ uint8_t seed[MAX_SEED_LEN]; -+ ssize_t seed_len; -+ int fd, dfd, ret = 0; -+ -+ fd = open(filename, O_RDONLY); -+ if (fd < 0 && errno == ENOENT) -+ return 0; -+ else if (fd < 0) { -+ ret = -errno; -+ eerror("Unable to open seed file: %s", strerror(errno)); -+ return ret; -+ } -+ dfd = open(SEED_DIR, O_DIRECTORY | O_RDONLY); -+ if (dfd < 0) { -+ ret = -errno; -+ close(fd); -+ eerror("Unable to open seed directory: %s", strerror(errno)); -+ return ret; -+ } -+ seed_len = read(fd, seed, sizeof(seed)); -+ if (seed_len < 0) { -+ ret = -errno; -+ eerror("Unable to read seed file: %s", strerror(errno)); -+ } -+ close(fd); -+ if (ret) { -+ close(dfd); -+ return ret; -+ } -+ if ((unlink(filename) < 0 || fsync(dfd) < 0) && seed_len) { -+ ret = -errno; -+ eerror("Unable to remove seed after reading, so not seeding: %s", strerror(errno)); -+ } -+ close(dfd); -+ if (ret) -+ return ret; -+ if (!seed_len) -+ return 0; -+ -+ blake2s_update(hash, &seed_len, sizeof(seed_len)); -+ blake2s_update(hash, seed, seed_len); -+ -+ einfo("Seeding %zd bits %s crediting", seed_len * 8, credit ? "and" : "without"); -+ ret = seed_rng(seed, seed_len, credit); -+ if (ret < 0) -+ eerror("Unable to seed: %s", strerror(-ret)); -+ return ret; -+} -+ -+static void populate_global_paths(void) -+{ -+ SEED_DIR = getenv("SEEDRNG_SEED_DIR"); -+ if (!SEED_DIR || !*SEED_DIR) -+ SEED_DIR = "/var/lib/seedrng"; -+ LOCK_FILE = getenv("SEEDRNG_LOCK_FILE"); -+ if (!LOCK_FILE || !*LOCK_FILE) -+ LOCK_FILE = "/var/run/seedrng.lock"; -+ xasprintf(&CREDITABLE_SEED, "%s/seed.credit", SEED_DIR); -+ xasprintf(&NON_CREDITABLE_SEED, "%s/seed.no-credit", SEED_DIR); -+} -+ -+int main(int argc _unused, char *argv[] _unused) -+{ -+ static const char seedrng_prefix[] = "SeedRNG v1 Old+New Prefix"; -+ static const char seedrng_failure[] = "SeedRNG v1 No New Seed Failure"; -+ int ret, fd, lock, program_ret = 0; -+ uint8_t new_seed[MAX_SEED_LEN]; -+ size_t new_seed_len; -+ bool new_seed_creditable; -+ struct timespec realtime = { 0 }, boottime = { 0 }; -+ struct blake2s_state hash; -+ -+ umask(0077); -+ if (getuid()) -+ eerrorx("This rc helper program requires root"); -+ -+ populate_global_paths(); -+ blake2s_init(&hash, BLAKE2S_HASH_LEN); -+ blake2s_update(&hash, seedrng_prefix, strlen(seedrng_prefix)); -+ clock_gettime(CLOCK_REALTIME, &realtime); -+ clock_gettime(CLOCK_BOOTTIME, &boottime); -+ blake2s_update(&hash, &realtime, sizeof(realtime)); -+ blake2s_update(&hash, &boottime, sizeof(boottime)); -+ -+ if (mkdir(SEED_DIR, 0700) < 0 && errno != EEXIST) -+ eerrorx("Unable to create \"%s\" directory: %s", SEED_DIR, strerror(errno)); -+ -+ lock = open(LOCK_FILE, O_WRONLY | O_CREAT, 0000); -+ if (lock < 0 || flock(lock, LOCK_EX) < 0) -+ eerrorx("Unable to open lock file: %s", strerror(errno)); -+ -+ ret = seed_from_file_if_exists(NON_CREDITABLE_SEED, false, &hash); -+ if (ret < 0) -+ program_ret |= 1 << 1; -+ ret = seed_from_file_if_exists(CREDITABLE_SEED, !rc_yesno(getenv("SEEDRNG_SKIP_CREDIT")), &hash); -+ if (ret < 0) -+ program_ret |= 1 << 2; -+ -+ new_seed_len = determine_optimal_seed_len(); -+ ret = read_new_seed(new_seed, new_seed_len, &new_seed_creditable); -+ if (ret < 0) { -+ eerror("Unable to read new seed: %s", strerror(-ret)); -+ new_seed_len = BLAKE2S_HASH_LEN; -+ strncpy((char *)new_seed, seedrng_failure, new_seed_len); -+ program_ret |= 1 << 3; -+ } -+ blake2s_update(&hash, &new_seed_len, sizeof(new_seed_len)); -+ blake2s_update(&hash, new_seed, new_seed_len); -+ blake2s_final(&hash, new_seed + new_seed_len - BLAKE2S_HASH_LEN); -+ -+ einfo("Saving %zu bits of %s seed for next boot", new_seed_len * 8, new_seed_creditable ? "creditable" : "non-creditable"); -+ fd = open(NON_CREDITABLE_SEED, O_WRONLY | O_CREAT | O_TRUNC, 0400); -+ if (fd < 0) { -+ eerror("Unable to open seed file for writing: %s", strerror(errno)); -+ program_ret |= 1 << 4; -+ goto out; -+ } -+ if (write(fd, new_seed, new_seed_len) != (ssize_t)new_seed_len || fsync(fd) < 0) { -+ eerror("Unable to write seed file: %s", strerror(errno)); -+ program_ret |= 1 << 5; -+ goto out; -+ } -+ if (new_seed_creditable && rename(NON_CREDITABLE_SEED, CREDITABLE_SEED) < 0) { -+ ewarn("Unable to make new seed creditable: %s", strerror(errno)); -+ program_ret |= 1 << 6; -+ } -+out: -+ close(fd); -+ close(lock); -+ return program_ret; -+} diff --git a/repo/system/openrc/sysctl.initd b/repo/system/openrc/sysctl.initd deleted file mode 100644 index befdb91..0000000 --- a/repo/system/openrc/sysctl.initd +++ /dev/null @@ -1,87 +0,0 @@ -#!/sbin/openrc-run - -depend() -{ - after clock - before bootmisc logger - keyword -prefix -systemd-nspawn -vserver -} - -start() -{ - local quiet retval=0 status - ebegin "Configuring kernel parameters" - - yesno $rc_verbose || quiet=-q - - eindent - - for f in /lib/sysctl.d/*.conf \ - /usr/lib/sysctl.d/*.conf; do - - if [ -f /etc/sysctl.d/"${f##*/}" ]; then - veinfo "Ignoring $f due to /etc/sysctl.d/${f##*/}" - continue - fi - - if [ -f /run/sysctl.d/"${f##*/}" ]; then - veinfo "Ignoring $f due to /run/sysctl.d/${f##*/}" - continue - fi - - if [ -f "$f" ]; then - vebegin "applying $f" - sysctl $quiet -p "$f" - status=$? - if [ $status -gt 0 ]; then - # Don't change retval= since we expect some package/distro provided - # sysctl configurations to break, so just warn when the user wants - # verbose messages - vewarn "Unable to configure kernel parameters from $f" - fi - fi - done - - for f in /etc/sysctl.d/*.conf; do - - if [ -f /run/sysctl.d/"${f##*/}" ]; then - veinfo "Ignoring $f due to /run/sysctl.d/${f##*/}" - continue - fi - - if [ -f "$f" ]; then - vebegin "applying $f" - sysctl $quiet -p "$f" - status=$? - if [ $status -gt 0 ]; then - retval=$(( $retval + $status )) - eerror "Unable to configure kernel parameters from $f" - fi - fi - done - - if [ -f /etc/sysctl.conf ]; then - vebegin "applying /etc/sysctl.conf" - sysctl $quiet -p /etc/sysctl.conf - status=$? - if [ $status -gt 0 ]; then - retval=$(( $retval + $status )) - eerror "Unable to configure kernel parameters from /etc/sysctl.conf" - fi - fi - - for f in /run/sysctl.d/*.conf; do - if [ -f "$f" ]; then - vebegin "applying $f" - sysctl $quiet -p "$f" - status=$? - if [ $status -gt 0 ]; then - retval=$(( $retval + $status )) - eerror "Unable to configure kernel parameters from $f" - fi - fi - done - eoutdent - - eend $retval -} diff --git a/repo/system/openrc/sysfsconf.initd b/repo/system/openrc/sysfsconf.initd deleted file mode 100644 index 433e51d..0000000 --- a/repo/system/openrc/sysfsconf.initd +++ /dev/null @@ -1,66 +0,0 @@ -#!/sbin/openrc-run - -description="Set sysfs variables from /etc/sysfs.conf and /etc/sysfs.d/*.conf" -conffile=/etc/sysfs.conf -confdir=/etc/sysfs.d - -depend() { - need sysfs -} - -setval() { - local value="$1" attrib="$2" - # Some fields need a terminating newline, others - # need the terminating newline to be absent :-( - echo -n "$value" > "$attrib" 2>/dev/null \ - || echo "$value" > "$attrib" -} - -load_conffile() { - local file="$1" - while read line; do - local line=${line%%#*} - local cmd= attrib= value= - set -- $line - if [ $# -eq 0 ]; then - continue - fi - case "$1$3" in - mode=) cmd=chmod - attrib="$2" - value="$4" - ;; - owner=) cmd=chown - attrib="$2" - value="$4" - ;; - *) if [ "$2" = "=" ]; then - cmd=setval - attrib="$1" - value="$3" - fi - ;; - esac - if ! [ -e "/sys/$attrib" ]; then - eerror "$attrib: unknown attribute" - continue - fi - if [ -z "$attrib" ] || [ -z "$value" ]; then - eerror "syntax error in $file: '$line'" - continue - fi - $cmd "$value" "/sys/$attrib" - done < "$file" -} - -start() { - [ -r "$conffile" -o -d "$confdir" ] || return 0 - ebegin "Setting sysfs variables" - for file in $confdir/*.conf $conffile; do - [ -r "$file" ] || continue - load_conffile "$file" || return 1 - done - eend 0 - -} - diff --git a/repo/system/openrc/test-networking.sh b/repo/system/openrc/test-networking.sh deleted file mode 100644 index 5e5f70b..0000000 --- a/repo/system/openrc/test-networking.sh +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/sh - -# unit tests for find_ifaces and find_running_ifaces in networking.initd - -cfgfile=/tmp/openrc-test-network.$$ -sourcefile=$cfgfile.source -sourcedir=$cfgfile.d -ifstate=$cfgfile.state - -cat >$cfgfile<$sourcefile<$sourcedir/a<$ifstate<