diff options
Diffstat (limited to 'config/mpd/mpd.conf')
| -rw-r--r-- | config/mpd/mpd.conf | 440 |
1 files changed, 440 insertions, 0 deletions
diff --git a/config/mpd/mpd.conf b/config/mpd/mpd.conf new file mode 100644 index 0000000..69178be --- /dev/null +++ b/config/mpd/mpd.conf @@ -0,0 +1,440 @@ +# An example configuration file for MPD. +# Read the user manual for documentation: http://www.musicpd.org/doc/user/ + + +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +#music_directory "~/music" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +#playlist_directory "~/.config/mpd/playlists" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +#db_file "~/.mpd/database" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog. +# +#log_file "~/.mpd/log" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +#pid_file "~/.mpd/pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +#state_file "~/.mpd/state" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +#sticker_file "~/.mpd/sticker.sql" +# +############################################################################### + + +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +#user "nobody" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +#group "nogroup" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other than the default, any. +# This setting can deny access to control of the daemon. Not effective if +# systemd socket activiation is in use. +# +# For network +#bind_to_address "0.0.0.0" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# Suppress all messages below the given threshold. Use "verbose" for +# troubleshooting. Available setting arguments are "notice", "info", "verbose", +# "warning" and "error". +# +#log_level "notice" +# +# Setting "restore_paused" to "yes" puts MPD into pause mode instead +# of starting playback after startup. +# +#restore_paused "no" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. The complete list of possible values can be +# found in the user manual. +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This example just enables the "comment" tag without disabling all +# the other supported tags: +#metadata_to_use "+comment" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +#auto_update_depth "3" +# +############################################################################### + + +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +#follow_outside_symlinks "yes" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### + + +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. %h will be replaced with the hostname. +# +#zeroconf_name "Music Player @ %h" +# +############################################################################### + + +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# setting can be specified multiple times for different password profiles. +# +#password "mpDsifrA@read,add,control,admi" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#Default_permissions "read" +# +############################################################################### + + +# Database ####################################################################### +# +# An example of a database section instead of the old 'db_file' setting. +# It enables mounting other storages into the music directory. +# +#database { +# plugin "simple" +# path "~/.local/share/mpd/db# +# cache_directory "~/.local/share/mpd/cache" +#} +# +# An example of database config for a sattelite setup +# +#music_directory "nfs://fileserver.local/srv/mp3" +#database { +# plugin "proxy" +# host "other.mpd.host" +# port "6600" +#} + +# Input ####################################################################### +# +input { + plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" + # proxy_password "password" + } + + # + ############################################################################### + + # Audio Output ################################################################ + # + # MPD supports various audio output types, as well as playing through multiple + # audio outputs at the same time, through multiple audio_output settings + # blocks. Setting this block is optional, though the server will only attempt + # autodetection for one sound card. + # + # An example of an ALSA output: + # + #audio_output { + # type "alsa" + # name "My ALSA Device" + ## device "hw:0,0" # optional + ## mixer_type "hardware" # optional + ## mixer_device "default" # optional + ## mixer_control "PCM" # optional + ## mixer_index "0" # optional + #} + # + # An example of an OSS output: + # + #audio_output { + # type "oss" + # name "My OSS Device" + ## device "/dev/dsp" # optional + ## mixer_type "hardware" # optional + ## mixer_device "/dev/mixer" # optional + ## mixer_control "PCM" # optional + #} + # + # An example of a shout output (for streaming to Icecast): + # + #audio_output { + # type "shout" + # encoder "vorbis" # optional + # name "My Shout Stream" + # host "localhost" + # port "8000" + # mount "/mpd.ogg" + # password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## url "http://example.com" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +audio_output { + type "httpd" + name "My HTTP Stream" + encoder "flac" # optional, vorbis or lame + #encoder "lame" # optional, vorbis or lame + port "6680" + #bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +# quality "5.0" # do not define if bitrate is defined + bitrate "440" # do not define if quality is defined + format "44100:16:1" + max_clients "0" # optional 0=no limit +} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +audio_output { + type "pulse" + name "mpd" +# server "remote_server" # optional +# sink "remote_server_sink" # optional +# media_role "media_role" #optional +} +audio_output { + type "fifo" + name "Visualizer feed" + path "/tmp/mpd.fifo" + format "44100:16:2" +} #audio_output { + # type "winmm" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +# or +## device "0" # optional +## mixer_type "hardware" # optional +#} +# +# An example of a wasapi output (Windows multimedia API). +# +#audio_output { +# type "wasapi" +# name "My WASAPI output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +# or +## device "0" # optional +## Exclusive mode blocks all other audio source, and get best audio quality without resampling. +## exclusive "no" # optional +## Enumerate all devices in log. +## enumerate "no" # optional +#} +# +# An example of an openal output. +# +#audio_output { +# type "openal" +# name "My OpenAL output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +#} +# +# An example of an sndio output. +# +#audio_output { +# type "sndio" +# name "sndio output" +# mixer_type "hardware" +#} +# +# An example of an OS X output: +# +#audio_output { +# type "osx" +# name "My OS X Device" +## device "Built-in Output" # optional +## channel_map "-1,-1,0,1" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +############################################################################### + + +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album", "track" or "auto". "auto" is a special mode that +# chooses between "track" and "album" depending on the current state of +# random playback. If random playback is enabled then "track" mode is used. +# See <https://wiki.hydrogenaud.io/index.php?title=Replaygain> for +# more details about ReplayGain. +# This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting sets the pre-amp used for files that do NOT have ReplayGain tags. +# By default this setting is disabled. +# +#replaygain_missing_preamp "0" +# +# This setting enables or disables ReplayGain limiting. +# MPD calculates actual amplification based on the ReplayGain tags +# and replaygain_preamp / replaygain_missing_preamp setting. +# If replaygain_limit is enabled MPD will never amplify audio signal +# above its #original level. If replaygain_limit is disabled such amplification +# might occur. By default this setting is enabled. +# +#replaygain_limit "yes" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### + +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. +# +#filesystem_charset "UTF-8" +# +############################################################################### + + +# Recommended location for database +db_file "~/.config/mpd/database" + +# Logs to systemd journal +log_file "syslog" + +# The music directory is by default the XDG directory, uncomment to amend and choose a different directory +music_directory "~/music" + +# Uncomment to refresh the database whenever files in the music_directory are changed +#auto_update "yes" + +# Uncomment to enable the functionalities +playlist_directory "~/.config/mpd/playlists" +pid_file "~/.config/mpd/pid" +state_file "~/.config/mpd/state" +sticker_file "~/.config/mpd/sticker.sql" + +restore_paused "yes" + + |