using sysvinit system bootscriptsHEADmaster

1 files changed, 2 insertions, 167 deletions

diff --git a/README.md b/README.md
index 40622ce..661e81f 100644
--- a/README.md
+++ b/README.md
@@ -1,167 +1,2 @@
-# Musl-LFS-S6-Bootscripts
-Bootscripts for Musl-LFS (MLFS) using S6 & S6-rc
-
-This is based on the works of [MLFS-S6-Bootscripts by dslm4515](https://github.com/dslm4515/MLFS-S6-Bootscripts)
-
-The aim of this project is to create the scripts and files to boot a MLFS/LFS system with S6 and S6-rc. This will replace the LFS bootscripts that LFS uses (to boot a LFS system with SysVinit).
-
-## Requirements
-
-The following can be found at Skarnet (https://skarnet.org/).
-  * skalibs 2.11.1.x (required by execline)
-  * execline 2.8.2.x (required by s6-rc)
-  * s6 2.1.0.x (required by s6-rc)
-  * s6-linux-utils
-  * s6-portable-utils (statically built)
-  * s6-rc 0.5.3.x (New service format)
-  * s6-linux-init (1.x.x.x)
-  * utmps
-
-## Directions
-
-Copy boot directories and scripts. Do not just copy entire git directory, as it will copy unneeded dot files:
-```
-# Enter chroot for target system first, otherwise adjust paths accordingly
-cp -ar s6 /etc/
-cp -av vconsole.conf /etc/
-install -v -m755 modules-load /usr/bin/
-install -v -m755 tmpfiles /bin/
-# Compile a basic database for boot
-s6-rc-compile /etc/s6/db/basic /etc/s6/sv 
-ln -sv /etc/s6/db/basic /etc/s6/db/current
-# Copy necessary scripts to boot, reboot, and poweroff system
-install -v -m755 s6/base/bin/* /sbin/
-mv /etc/s6/base/scripts /etc/s6/scripts
-# Re-initialize s6 init base
-rm -rf /etc/s6/base
-s6-linux-init-maker -1 -f /etc/s6/skel -p "/bin:/sbin:/usr/bin"    \
-                    -D default -G "/sbin/agetty -L -8 tty1 115200" \
-                    -c /etc/s6/base -t 2 -L -u root -U utmp /etc/s6/base
-rm -rf /etc/s6/base/scripts
-cp -r /etc/s6/scripts /etc/s6/base/scripts
-
-# Copy scripts to bring NIC's up and down
-install -v -m755 if* /sbin/
-mkdir -pv /lib/services
-install -v -m755 net-services/* /lib/services/
-```
-
-For logging services, create the log user as root:
-```
-groupadd -g 983 s6log &&
-useradd -c "S6-Log User" -d / \
-        -u 983 -g s6log -s /usr/bin/false s6log
-```
-Make sure the directory for dmesg logging is owned by the log user
-```
-mkdir -pv /var/log/dmesg
-chown -v s6log:s6log /var/log/
-```
-
-For utmps, create a utmp user:
-```
-useradd -c "utmps user" -d /run/utmps \
-        -u 984 -g utmp -s /bin/false utmp
-```
-
-Make sure the directory for wtmp is owned by utmp user:
-```
-mkdir -pv /var/log/utmps
-mv -v /var/log/wtmp /var/log/utmps/
-chown -vR utmp:utmp /var/log/utmps
-ln -sv utmps/wtmp /var/log/wtmp
-```
-
-Bootscripts no longer require system boot with a initramfs image. But kernel parameters should boot with root filesystem as read-only for checking root filesystem at boot (i.e. linux root=/dev/sda2 ro) You may use scripts from BLFS or Musl-LFS to build one. Script requires cpio installed.
-```
-# Copy the script to /sbin:
-install -v -m755 mkinitrd/mkinitramfs /sbin/
-# Copy the configuration:
-mkdir -p /usr/share/mkinitramfs 
-install -v -m644 mkinitrd/init.in /usr/share/mkinitramfs/ 
-# To use, use the kernel version:
-mkinitramfs $(uname -r)
-
-```
-
-## Layout
-
-Directories in s6:
-  * base - Base directory for s6-linux-init
-  * base/run-image - Directory copied to /run at beginning of boot
-  * base/scripts - Scripts to shutdown and start system via s6-linux-init
-  * base/env - Enviromental varibles to set at boot
-  * db - Compiled databases for boot
-  * db/current - Compiled database to use for boot
-  * skel - Default startup/shutdown scripts
-  * sv - Source definitions for databases and services
-  * scripts - Small scripts used by services compiled from sv
-  * doc/mock-boot-tree - Use command tree to see how the layout of sv
-
-## Scripts:
-  * rc.local - Additional shell commands to execute on bootup
-  * s6.conf - Global configuration of s6-rc services
-
-## mkinitrd:
-  * mkinitramfs - Script to make a basic initramfs
-  * init.in - Configuration for script.
-
-## Setting up Networking at Boot:
-```
-# install net-services:
-mkdir -v /lib/services
-install -v -m644 net-services/* /lib/services/
-# install helper scripts to bring up and down interfaces:
-install -v -m755 if* /sbin/
-```
-Each interface should have configuration files in /etc/sysconfig. For example:
-```
-/etc/sysconfig/ifconfig.wlan0              # config for a wifi card
-/etc/sysconfig/wpa_supplicant-wlan0.conf   # config for wpa_supplicant for same wifi card
-```
-
-Examples are in net-configs
-
-## Usage
-
-To disable/enable services, modify the contents of `/etc/s6/sv/services/contents.d`. Then compile a new database to use for the next boot.
-
-For example, to enable dbus service:
-```
-# Install dbus service scripts (dbus-srv, dbus-log) to /etc/s6/sv/
-
-# Add dbus script to list of services to start at boot:
-touch /etc/s6/sv/services/contents.d/dbus-srv
-
-# Compile a new database for boot
-s6-rc-compile /etc/s6/db/${new_db} /etc/s6/sv
-
-# Link new database to boot
-mv -v /etc/s6/db/current /etc/s6/db/previous
-ln -sv /etc/s6/db/${new_db} /etc/s6/db/current
-```
-
-Services an be enabled or disabled after boot:
-```
-# Enable a service that was not enabled at boot
-sudo s6-rc -u change ${service_name}
-
-# Disable a service
-sudo s6-rc -d change ${service_name}
-
-# To see the list of services to enable/disable:
-ls /run/service/*
-
-```
-
-## Changelog since 4.x.x
-
-<ul>
-<li>Updated service format: Bundles now use contents.d & dependencies.d directories instead of contents & dependencies files</li>
-<li>Improved service dependacies: Previous format had issues some services starting before required service(s) executed</li>
-<li>/tmp directory now cleaned during boot and during shutdown </li>
-<li>System clock now set from hardware clock </li>
-<li>Most commands in service scripts use commands from s6-linux-utils or s6-portable-utils </li>
-<li>Cleaned up boot messages that are logged in /run/uncaught-logs/current </li>
-
-</ul>
+# xilinux bootscripts
+bootscripts for sysvinit with openrc for xilinux