reorganised

4 files changed, 0 insertions, 115 deletions

diff --git a/s6/base/scripts/rc.init b/s6/base/scripts/rc.init
deleted file mode 100755
index 56c3e7b..0000000
--- a/s6/base/scripts/rc.init
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh -e
-
-rl="$1"
-shift
-
-### argv now contains the arguments of the kernel command line that are
-### not of the form key=value. (The key=value arguments were stored by
-### s6-linux-init into an envdir, if instructed so via the -s option.)
-### Normally this argv remains unused because programs that need the
-### kernel command line usually read it later on from /proc/cmdline -
-### but just in case, it's available here.
-
-
-### 1. Early preparation
-### This is done only once at boot time.
-### Ideally, this phase should just initialize the service manager.
-
-### If your services are managed by sysv-rc:
-# /etc/init.d/rcS
-
-### If your services are managed by OpenRC:
-# /sbin/openrc sysinit
-# /sbin/openrc boot
-
-### If your services are managed by s6-rc:
-### (replace /run/service with your scandir)
-s6-rc-init -c /etc/s6/db/current /run/service
-
-
-### 2. Starting the wanted set of services
-### This is also called every time you change runlevels with telinit.
-### (edit the location to suit your installation)
-### By default, $rl is the string "default", unless you changed it
-### via the -D option to s6-linux-init-maker.
-### Numeric arguments from 1 to 5 on the kernel command line will
-### override the default.
-
-exec /etc/s6/base/scripts/runlevel "$rl"
-
-
-### If this script is run in a container, then 1. and 2. above do not
-### apply and you should just call your CMD, if any, or let your
-### services run.
-### Something like this:
-
-# if test -z "$*" ; then return 0 ; fi
-# $@
-# echo $? > /run/s6-linux-init-container-results/exitcode
-# halt
diff --git a/s6/base/scripts/rc.shutdown b/s6/base/scripts/rc.shutdown
deleted file mode 100755
index f759ba7..0000000
--- a/s6/base/scripts/rc.shutdown
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh -e
-
-### Things to do before hardware halt/reboot/poweroff.
-### Ideally, it should be a single call to the service manager,
-### telling it to bring all the services down.
-
-### If your s6-linux-init-maker invocation was made with the -1
-### option, messages from rc.shutdown will appear on /dev/console
-### as well as be logged by the catch-all logger.
-### If your s6-linux-init-maker invocation did NOT include the -1
-### option, messages from rc.shutdown will only be logged by the
-### catch-all logger and will NOT appear on /dev/console. In order
-### to print them to /dev/console instead, you may want to
-### uncomment the following line:
-exec >/dev/console 2>&1
-
-### If your services are managed by sysv-rc:
-### also remove the K11reboot link from /etc/rc6.d to prevent
-### sysv-rc from rebooting prematurely - because sysvinit does
-### not properly separate state changes from system init/shutdown.
-# exec /etc/init.d/rc 6
-
-### If your services are managed by OpenRC:
-### also remove the "killprocs" and "mount-ro" symlinks from
-### /etc/runlevels/shutdown - because OpenRC does not properly
-### separate the service manager from the shutdown manager either.
-# exec /sbin/openrc shutdown
-
-### If your services are managed by s6-rc:
-exec s6-rc -v2 -bda change
diff --git a/s6/base/scripts/rc.shutdown.final b/s6/base/scripts/rc.shutdown.final
deleted file mode 100755
index 3f46b87..0000000
--- a/s6/base/scripts/rc.shutdown.final
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh -e
-
-### Things to do *right before* the machine gets rebooted or
-### powered off, at the very end of the shutdown sequence,
-### when all the filesystems are unmounted.
-
-### This is a last resort hook; normally nothing should be
-### done here (your rc.shutdown script should have taken care
-### of everything) and you should leave this script empty.
-
-### Some distributions, however, may need to perform some
-### actions after unmounting the filesystems: typically if
-### an additional teardown action is required on a filesystem
-### after unmounting it, or if the system needs to be
-### pivot_rooted before it can be shut down, etc.
-
-### Those are all exceptional cases. If you don't know for
-### certain that you need to do something here, you don't.
diff --git a/s6/base/scripts/runlevel b/s6/base/scripts/runlevel
deleted file mode 100755
index d266171..0000000
--- a/s6/base/scripts/runlevel
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh -e
-
-### This script is called once at boot time by rc.init, and is
-### also called by the runleveld service every time the user
-### requests a machine state change via telinit.
-### Ideally, it should just be a call to the service manager.
-
-test "$#" -gt 0 || { echo 'runlevel: fatal: too few arguments' 1>&2 ; exit 100 ; }
-
-
-### If your services are managed by sysv-rc:
-# exec /etc/init.d/rc "$1"
-
-### If your services are managed by OpenRC:
-# exec /sbin/openrc "$1"
-
-### If your services are managed by s6-rc:
-exec s6-rc -v2 -up change "$1"