added deps for qemu

11 files changed, 0 insertions, 783 deletions

diff --git a/skip/cryptsetup/cryptsetup.xibuild b/skip/cryptsetup/cryptsetup.xibuild
deleted file mode 100644
index 6c883d9..0000000
--- a/skip/cryptsetup/cryptsetup.xibuild
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-NAME="cryptsetup"
-DESC="Userspace setup tool for transparent encryption of block devices using the Linux 2.6 cryptoapi"
-
-MAKEDEPS="make"
-DEPS="util-linux musl popt device-mapper"
-
-PKG_VER=2.4.3
-SOURCE="https://www.kernel.org/pub/linux/utils/cryptsetup/v${PKG_VER%.*}/cryptsetup-$PKG_VER.tar.gz"
-ADDITIONAL="dmcrypt.initd dmcrypt.confd "
-
-build () {
-    ./configure \
-        --prefix=/usr \
-        --bindir=/usr/bin \
-        --sysconfdir=/etc \
-        --disable-static \
-        --enable-libargon2 \
-		--with-crypto_backend=openssl \
-		--disable-external-tokens \
-		--disable-ssh-token
-
-    make
-}
-
-package () {
-    make DESTDIR=$PKG_DEST install
-    install -Dm644 "$srcdir"/dmcrypt.confd "$PKG_DEST"/etc/conf.d/dmcrypt
-	install -Dm755 "$srcdir"/dmcrypt.initd "$PKG_DEST"/etc/init.d/dmcrypt
-
-	mkdir -p "$PKG_DEST"/usr/share/doc/cryptsetup/
-	install -m644 README.md FAQ docs/v$PKG_VER-ReleaseNotes \
-		"$PKG_DEST"/usr/share/doc/cryptsetup/
-
-}
diff --git a/skip/cryptsetup/dmcrypt.confd b/skip/cryptsetup/dmcrypt.confd
deleted file mode 100644
index 642ff08..0000000
--- a/skip/cryptsetup/dmcrypt.confd
+++ /dev/null
@@ -1,111 +0,0 @@
-# /etc/conf.d/dmcrypt
-
-# For people who run dmcrypt on top of some other layer (like raid),
-# use rc_need to specify that requirement.  See the runscript(8) man
-# page for more information.
-
-#--------------------
-# Instructions
-#--------------------
-
-# Note regarding the syntax of this file.  This file is *almost* bash,
-# but each line is evaluated separately.  Separate swaps/targets can be
-# specified.  The init-script which reads this file assumes that a
-# swap= or target= line starts a new section, similar to lilo or grub
-# configuration.
-
-# Note when using gpg keys and /usr on a separate partition, you will
-# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly
-# and ensure that gpg has been compiled statically.
-# See http://bugs.gentoo.org/90482 for more information.
-
-# Note that the init-script which reads this file detects whether your
-# partition is LUKS or not. No mkfs is run unless you specify a makefs
-# option.
-
-# Global options:
-#----------------
-
-# How long to wait for each timeout (in seconds).
-dmcrypt_key_timeout=1
-
-# Max number of checks to perform (see dmcrypt_key_timeout).
-#dmcrypt_max_timeout=300
-
-# Number of password retries.
-dmcrypt_retries=5
-
-# Arguments:
-#-----------
-# target=<name>                      == Mapping name for partition.
-# swap=<name>                        == Mapping name for swap partition.
-# source='<dev>'                     == Real device for partition.
-#                                    Note: You can (and should) specify a tag like UUID
-#                                    for blkid (see -t option).  This is safer than using
-#                                    the full path to the device.
-# key='</path/to/keyfile>[:<mode>]'  == Fullpath from / or from inside removable media.
-# remdev='<dev>'                     == Device that will be assigned to removable media.
-# gpg_options='<opts>'               == Default are --quiet --decrypt
-# options='<opts>'                   == cryptsetup, for LUKS you can only use --readonly
-# loop_file='<file>'                 == Loopback file.
-#                                    Note: If you omit $source, then a free loopback will
-#                                    be looked up automatically.
-# pre_mount='cmds'                   == commands to execute before mounting partition.
-# post_mount='cmds'                  == commands to execute after mounting partition.
-#-----------
-# Supported Modes
-# gpg					== decrypt and pipe key into cryptsetup.
-#						Note: new-line character must not be part of key.
-#						Command to erase \n char: 'cat key | tr -d '\n' > cleanKey'
-
-#--------------------
-# dm-crypt examples
-#--------------------
-
-## swap
-# Swap partitions. These should come first so that no keys make their
-# way into unencrypted swap.
-# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom
-# If no makefs is given then mkswap will be assumed
-#swap=crypt-swap
-#source='/dev/hda2'
-
-## /home with passphrase
-#target=crypt-home
-#source='/dev/hda5'
-
-## /home with regular keyfile
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey'
-
-## /home with gpg protected key
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey:gpg'
-
-## /home with regular keyfile on removable media(such as usb-stick)
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey'
-#remdev='/dev/sda1'
-
-## /home with gpg protected key on removable media(such as usb-stick)
-#target=crypt-home
-#source='/dev/hda5'
-#key='/full/path/to/homekey:gpg'
-#remdev='/dev/sda1'
-
-## /tmp with regular keyfile
-#target=crypt-tmp
-#source='/dev/hda6'
-#key='/full/path/to/tmpkey'
-#pre_mount='/sbin/mkreiserfs -f -f ${dev}'
-#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}'
-
-## Loopback file example
-#target='crypt-loop-home'
-#source='/dev/loop0'
-#loop_file='/mnt/crypt/home'
-
-# The file must be terminated by a newline.  Or leave this comment last.
diff --git a/skip/cryptsetup/dmcrypt.initd b/skip/cryptsetup/dmcrypt.initd
deleted file mode 100644
index 85c77f7..0000000
--- a/skip/cryptsetup/dmcrypt.initd
+++ /dev/null
@@ -1,339 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	before checkfs fsck
-
-	if grep -qs ^swap= "${conf_file}" ; then
-		before swap
-	fi
-}
-
-# We support multiple dmcrypt instances based on $SVCNAME
-conf_file="/etc/conf.d/${SVCNAME}"
-
-# Get splash helpers if available.
-if [ -e /sbin/splash-functions.sh ] ; then
-	. /sbin/splash-functions.sh
-fi
-
-# Setup mappings for an individual target/swap
-# Note: This relies on variables localized in the main body below.
-dm_crypt_execute() {
-	local dev ret mode foo
-
-	if [ -z "${target}" -a -z "${swap}" ] ; then
-		return
-	fi
-
-	# Set up default values.
-	: ${dmcrypt_key_timeout:=1}
-	: ${dmcrypt_max_timeout:=300}
-	: ${dmcrypt_retries:=5}
-
-	# Handle automatic look up of the source path.
-	if [ -z "${source}" -a -n "${loop_file}" ] ; then
-		source=$(losetup --show -f "${loop_file}")
-	fi
-	case ${source} in
-	*=*)
-		source="$(findfs ${source})"
-		;;
-	esac
-	if [ -z "${source}" ] || [ ! -e "${source}" ] ; then
-		ewarn "source \"${source}\" for ${target} missing, skipping..."
-		return
-	fi
-
-	if [ -n "${target}" ] ; then
-		# let user set options, otherwise leave empty
-		: ${options:=' '}
-	elif [ -n "${swap}" ] ; then
-		if cryptsetup isLuks ${source} 2>/dev/null ; then
-			ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup."
-			return
-		fi
-		target=${swap}
-		# swap contents do not need to be preserved between boots, luks not required.
-		# suspend2 users should have initramfs's init handling their swap partition either way.
-		: ${options:='-c aes -h sha1 -d /dev/urandom'}
-		: ${pre_mount:='mkswap ${dev}'}
-	fi
-
-	if [ -n "${loop_file}" ] ; then
-		dev="/dev/mapper/${target}"
-		ebegin "  Setting up loop device ${source}"
-		losetup ${source} ${loop_file}
-	fi
-
-	# cryptsetup:
-	# open   <device> <name>      # <device> is $source
-	# create <name>   <device>    # <name>   is $target
-	local arg1="create" arg2="${target}" arg3="${source}"
-	if cryptsetup isLuks ${source} 2>/dev/null ; then
-		arg1="open"
-		arg2="${source}"
-		arg3="${target}"
-	fi
-
-	# Older versions reported:
-	#	${target} is active:
-	# Newer versions report:
-	#	${target} is active[ and is in use.]
-	if cryptsetup status ${target} | egrep -q ' is active' ; then
-		einfo "dm-crypt mapping ${target} is already configured"
-		return
-	fi
-	splash svc_input_begin ${SVCNAME} >/dev/null 2>&1
-
-	# Handle keys
-	if [ -n "${key}" ] ; then
-		read_abort() {
-			# some colors
-			local ans savetty resettty
-			[ -z "${NORMAL}" ] && eval $(eval_ecolors)
-			einfon "  $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) "
-			shift
-			# This is ugly as s**t.  But POSIX doesn't provide `read -t`, so
-			# we end up having to implement our own crap with stty/etc...
-			savetty=$(stty -g)
-			resettty='stty ${savetty}; trap - EXIT HUP INT TERM'
-			trap 'eval "${resettty}"' EXIT HUP INT TERM
-			stty -icanon
-			stty min 0 time "$(( $2 * 10 ))"
-			ans=$(dd count=1 bs=1 2>/dev/null) || ans=''
-			eval "${resettty}"
-			if [ -z "${ans}" ] ; then
-				printf '\r'
-			else
-				echo
-			fi
-			case ${ans} in
-				[yY]) return 0;;
-				*) return 1;;
-			esac
-		}
-
-		# Notes: sed not used to avoid case where /usr partition is encrypted.
-		mode=${key##*:} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg
-		key=${key%:*}
-		case "${mode}" in
-		gpg|reg)
-			# handle key on removable device
-			if [ -n "${remdev}" ] ; then
-				# temp directory to mount removable device
-				local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$"
-				if [ ! -d "${mntrem}" ] ; then
-					if ! mkdir -p "${mntrem}" ; then
-						ewarn "${source} will not be decrypted ..."
-						einfo "Reason: Unable to create temporary mount point '${mntrem}'"
-						return
-					fi
-				fi
-				i=0
-				einfo "Please insert removable device for ${target}"
-				while [ ${i} -lt ${dmcrypt_max_timeout} ] ; do
-					foo=""
-					if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then
-						# keyfile exists?
-						if [ ! -e "${mntrem}${key}" ] ; then
-							umount -n "${mntrem}"
-							rmdir "${mntrem}"
-							einfo "Cannot find ${key} on removable media."
-							read_abort "Abort" ${dmcrypt_key_timeout} && return
-						else
-							key="${mntrem}${key}"
-							break
-						fi
-					else
-						[ -e "${remdev}" ] \
-							&& foo="mount failed" \
-							|| foo="mount source not found"
-					fi
-					: $((i += 1))
-					read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return
-				done
-			else    # keyfile ! on removable device
-				if [ ! -e "${key}" ] ; then
-					ewarn "${source} will not be decrypted ..."
-					einfo "Reason: keyfile ${key} does not exist."
-					return
-				fi
-			fi
-			;;
-		*)
-			ewarn "${source} will not be decrypted ..."
-			einfo "Reason: mode ${mode} is invalid."
-			return
-			;;
-		esac
-	else
-		mode=none
-	fi
-	ebegin "  ${target} using: ${options} ${arg1} ${arg2} ${arg3}"
-	if [ "${mode}" = "gpg" ] ; then
-		: ${gpg_options:='-q -d'}
-		# gpg available ?
-		if command -v gpg >/dev/null ; then
-			i=0
-			while [ ${i} -lt ${dmcrypt_retries} ] ; do
-				# paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected.
-				# save stdin stdout stderr "values"
-				timeout ${dmcrypt_max_timeout} gpg ${gpg_options} ${key} 2>/dev/null | \
-					cryptsetup --key-file - ${options} ${arg1} ${arg2} ${arg3}
-				ret=$?
-				# The timeout command exits 124 when it times out.
-				[ ${ret} -eq 0 -o ${ret} -eq 124 ] && break
-				: $(( i += 1 ))
-			done
-			eend ${ret} "failure running cryptsetup"
-		else
-			ewarn "${source} will not be decrypted ..."
-			einfo "Reason: cannot find gpg application."
-			einfo "You have to install gnupg first."
-			einfo "If you have /usr on its own partition, try copying gpg to /bin ."
-		fi
-	else
-		if [ "${mode}" = "reg" ] ; then
-			cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3}
-			ret=$?
-			eend ${ret} "failure running cryptsetup"
-		else
-			cryptsetup ${options} ${arg1} ${arg2} ${arg3}
-			ret=$?
-			eend ${ret} "failure running cryptsetup"
-		fi
-	fi
-	if [ -d "${mntrem}" ] ; then
-		umount -n ${mntrem} 2>/dev/null >/dev/null
-		rmdir ${mntrem} 2>/dev/null >/dev/null
-	fi
-	splash svc_input_end ${SVCNAME} >/dev/null 2>&1
-
-	if [ ${ret} -ne 0 ] ; then
-		cryptfs_status=1
-	else
-		if [ -n "${pre_mount}" ] ; then
-			dev="/dev/mapper/${target}"
-			eval ebegin \""    pre_mount: ${pre_mount}"\"
-			eval "${pre_mount}" > /dev/null
-			ewend $? || cryptfs_status=1
-		fi
-	fi
-}
-
-# Lookup optional bootparams
-get_bootparam_val() {
-	# We're given something like:
-	#    foo=bar=cow
-	# Return the "bar=cow" part.
-	case $1 in
-	*=*)
-		echo "${1#*=}"
-		;;
-	esac
-}
-
-start() {
-	local header=true cryptfs_status=0
-	local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev
-
-	local x
-	for x in $(cat /proc/cmdline) ; do
-		case "${x}" in
-		key_timeout=*)
-			dmcrypt_key_timeout=$(get_bootparam_val "${x}")
-			;;
-		esac
-	done
-
-	while read targetline <&3 ; do
-		case ${targetline} in
-		# skip comments and blank lines
-		""|"#"*) continue ;;
-		# skip service-specific openrc configs #377927
-		rc_*) continue ;;
-		esac
-
-		${header} && ebegin "Setting up dm-crypt mappings"
-		header=false
-
-		# check for the start of a new target/swap
-		case ${targetline} in
-		target=*|swap=*)
-			# If we have a target queued up, then execute it
-			dm_crypt_execute
-
-			# Prepare for the next target/swap by resetting variables
-			unset gpg_options key loop_file target options pre_mount post_mount source swap remdev
-			;;
-
-		gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*)
-			if [ -z "${target}${swap}" ] ; then
-				ewarn "Ignoring setting outside target/swap section: ${targetline}"
-				continue
-			fi
-			;;
-
-		dmcrypt_*=*)
-			# ignore global options
-			continue
-			;;
-
-		*)
-			ewarn "Skipping invalid line in ${conf_file}: ${targetline}"
-			;;
-		esac
-
-		# Queue this setting for the next call to dm_crypt_execute
-		eval "${targetline}"
-	done 3< ${conf_file}
-
-	# If we have a target queued up, then execute it
-	dm_crypt_execute
-
-	ewend ${cryptfs_status} "Failed to setup dm-crypt devices"
-}
-
-stop() {
-	local line header
-
-	# Break down all mappings
-	header=true
-	egrep "^(target|swap)=" ${conf_file} | \
-	while read line ; do
-		${header} && einfo "Removing dm-crypt mappings"
-		header=false
-
-		target= swap=
-		eval ${line}
-
-		[ -n "${swap}" ] && target=${swap}
-		if [ -z "${target}" ] ; then
-			ewarn "invalid line in ${conf_file}: ${line}"
-			continue
-		fi
-
-		ebegin "  ${target}"
-		cryptsetup remove ${target}
-		eend $?
-	done
-
-	# Break down loop devices
-	header=true
-	grep '^source=./dev/loop' ${conf_file} | \
-	while read line ; do
-		${header} && einfo "Detaching dm-crypt loop devices"
-		header=false
-
-		source=
-		eval ${line}
-
-		ebegin "  ${source}"
-		losetup -d "${source}"
-		eend $?
-	done
-
-	return 0
-}
diff --git a/skip/zynaddsubfx/zynaddsubfx-3.0.6-libzest_location.patch b/skip/zynaddsubfx/zynaddsubfx-3.0.6-libzest_location.patch
deleted file mode 100644
index ce14e67..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-3.0.6-libzest_location.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git i/src/Plugin/ZynAddSubFX/ZynAddSubFX-UI-Zest.cpp w/src/Plugin/ZynAddSubFX/ZynAddSubFX-UI-Zest.cpp
-index 0829e889..010e1fac 100644
---- i/src/Plugin/ZynAddSubFX/ZynAddSubFX-UI-Zest.cpp
-+++ w/src/Plugin/ZynAddSubFX/ZynAddSubFX-UI-Zest.cpp
-@@ -68,7 +68,7 @@ public:
- #else
-         handle = dlopen("./libzest.so", RTLD_LAZY);
-         if(!handle)
--            handle = dlopen("/opt/zyn-fusion/libzest.so", RTLD_LAZY);
-+            handle = dlopen("/usr/lib/zynaddsubfx/libzest.so", RTLD_LAZY);
-         if(!handle)
-             handle = dlopen("libzest.so", RTLD_LAZY);
- #endif
diff --git a/skip/zynaddsubfx/zynaddsubfx-3.0.6-system_rtosc.patch b/skip/zynaddsubfx/zynaddsubfx-3.0.6-system_rtosc.patch
deleted file mode 100644
index 799ff8e..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-3.0.6-system_rtosc.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-diff --git a/CMakeLists.txt b/CMakeLists.txt
-index 5c708574..ef17dbd3 100644
---- a/CMakeLists.txt
-+++ b/CMakeLists.txt
-@@ -10,24 +10,34 @@ if(DEFINED ZYN_DATADIR)
- add_definitions(-DZYN_DATADIR="${ZYN_DATADIR}")
- endif()
- 
-+option(ZYN_SYSTEM_RTOSC "Use system provided librtosc and librtosc-cpp" OFF)
-+
- #Include RTOSC
--if(NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/rtosc/CMakeLists.txt")
--    message(STATUS "RTOSC NOT FOUND")
--    message(STATUS "Attempting to checkout submodule")
--    find_package(Git REQUIRED)
--    execute_process(COMMAND git submodule update --init --recursive)
-+if(ZYN_SYSTEM_RTOSC)
-+    include(FindPkgConfig)
-+    pkg_check_modules(RTOSC REQUIRED librtosc)
-+    pkg_check_modules(RTOSC_CPP REQUIRED librtosc-cpp)
-+    include_directories(${RTOSC_INCLUDE_DIR})
-+    message(STATUS "Found system provided librtosc and librtosc-cpp...")
-+else()
-     if(NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/rtosc/CMakeLists.txt")
--        message(FATAL_ERROR "FAILED TO CHECKOUT RTOSC\n"
--        "please check file permissions and your network")
-+        message(STATUS "RTOSC NOT FOUND")
-+        message(STATUS "Attempting to checkout submodule")
-+        find_package(Git REQUIRED)
-+        execute_process(COMMAND git submodule update --init --recursive)
-+        if(NOT EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/rtosc/CMakeLists.txt")
-+            message(FATAL_ERROR "FAILED TO CHECKOUT RTOSC\n"
-+            "please check file permissions and your network")
-+        endif()
-+    else()
-+        message(STATUS "Found Rtosc Submodule...")
-     endif()
--else()
--    message(STATUS "Found Rtosc Submodule...")
--endif()
- 
--set(RTOSC_NO_INSTALL TRUE)
--include("rtosc/cmake/ColorMessage.cmake")
--add_subdirectory(rtosc)
--include_directories(rtosc/include)
-+    set(RTOSC_NO_INSTALL TRUE)
-+    include("rtosc/cmake/ColorMessage.cmake")
-+    add_subdirectory(rtosc)
-+    include_directories(rtosc/include)
-+endif()
- 
- enable_testing()
- include(CTestConfig.cmake)
-diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
-index 2900f4b7..8348df70 100644
---- a/src/CMakeLists.txt
-+++ b/src/CMakeLists.txt
-@@ -575,13 +575,27 @@ else()
-     set(PTHREAD_LIBRARY pthread)
- endif()
- 
--target_link_libraries(zynaddsubfx_core
--	${ZLIB_LIBRARIES}
--	${FFTW3F_LIBRARIES}
--	${MXML_LIBRARIES}
--	${OS_LIBRARIES}
--    ${PTHREAD_LIBRARY}
--    rtosc rtosc-cpp)
-+if(ZYN_SYSTEM_RTOSC)
-+    target_link_libraries(zynaddsubfx_core
-+        ${ZLIB_LIBRARIES}
-+        ${FFTW3F_LIBRARIES}
-+        ${MXML_LIBRARIES}
-+        ${OS_LIBRARIES}
-+        ${PTHREAD_LIBRARY}
-+        ${RTOSC_LIBRARIES}
-+        ${RTOSC_CPP_LIBRARIES}
-+    )
-+else()
-+    target_link_libraries(zynaddsubfx_core
-+        ${ZLIB_LIBRARIES}
-+        ${FFTW3F_LIBRARIES}
-+        ${MXML_LIBRARIES}
-+        ${OS_LIBRARIES}
-+        ${PTHREAD_LIBRARY}
-+        rtosc
-+        rtosc-cpp
-+    )
-+endif()
- 
- if(IwyuErr)
-     message (STATUS "Include what you use: ${IwyuErr}")
diff --git a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-cflags_ldflags.patch b/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-cflags_ldflags.patch
deleted file mode 100644
index 09dca6f..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-cflags_ldflags.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-diff --git i/Makefile w/Makefile
-index 7bc3788..3af1cce 100644
---- i/Makefile
-+++ w/Makefile
-@@ -16,10 +16,14 @@ linux:
- 	$(CC) -shared -o libzest.so `find mruby/build/host -type f | grep -v mrbc | grep -e "\.o$$" | grep -v bin` ./deps/libnanovg.a \
- 		./deps/libnanovg.a \
- 		src/osc-bridge/libosc-bridge.a \
--		`pkg-config --libs libuv` -lm -lX11 -lGL -lpthread
-+		$(CFLAGS) \
-+		`pkg-config --libs libuv` -lm -lX11 -lGL -lpthread \
-+		$(LDFLAGS)
- 	$(CC) test-libversion.c deps/pugl/pugl/pugl_x11.c \
-+		$(CFLAGS) \
- 		  -DPUGL_HAVE_GL \
--		  -ldl -o zest -lX11 -lGL -lpthread -I deps/pugl -std=gnu99 -Wno-trigraphs
-+		  -ldl -o zest -lX11 -lGL -lpthread -I deps/pugl -std=gnu99 -Wno-trigraphs \
-+			$(LDFLAGS)
- 
- osx: deps/libuv.a
- 	ruby ./rebuild-fcache.rb
diff --git a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-devendor_rtosc.patch b/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-devendor_rtosc.patch
deleted file mode 100644
index 38e84e1..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-devendor_rtosc.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-diff --git i/src/mruby-widget-lib/src/gem.c w/src/mruby-widget-lib/src/gem.c
-index 8e3d721..7f200e3 100644
---- i/src/mruby-widget-lib/src/gem.c
-+++ w/src/mruby-widget-lib/src/gem.c
-@@ -11,8 +11,8 @@
- #ifdef WIN32
- #include <windows.h>
- #endif
-+#include <rtosc/rtosc.h>
- #include "../../../deps/pugl/pugl/pugl.h"
--#include "../../../deps/rtosc/include/rtosc/rtosc.h"
- #include "../../../src/osc-bridge/src/bridge.h"
- #include "../../../deps/mruby-nanovg/src/gl_core.3.2.h"
- 
diff --git a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-libzest_location.patch b/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-libzest_location.patch
deleted file mode 100644
index 26dad92..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-libzest_location.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git i/test-libversion.c w/test-libversion.c
-index 808c01f..a122585 100644
---- i/test-libversion.c
-+++ w/test-libversion.c
-@@ -660,7 +660,7 @@ int main(int argc, char **argv)
-     if(!handle)
-         handle = dlopen("libzest.so", RTLD_LAZY);
-     if(!handle)
--        handle = dlopen("/opt/zyn-fusion/libzest.so", RTLD_LAZY);
-+        handle = dlopen("/usr/lib/zynaddsubfx/libzest.so", RTLD_LAZY);
- #endif
-     if(!handle) {
-         printf("[ERROR] Cannot Open libzest.so\n");
diff --git a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-makefile_find.patch b/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-makefile_find.patch
deleted file mode 100644
index d6e3a93..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-makefile_find.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From c1f5fcbad97c20b14a35e894477081d69519f6b0 Mon Sep 17 00:00:00 2001
-From: David Runge <dave@sleepmap.de>
-Date: Sat, 21 May 2022 13:19:48 +0200
-Subject: [PATCH] Use find internals instead of piping into grep
-
-Makefile:
-Use GNU find internals (e.g. `-iname`, `-exec` and conditionals) instead
-of piping into multiple instances of grep.
-Simplify line counting by using wc from find.
----
- Makefile | 24 ++++++++++++------------
- 1 file changed, 12 insertions(+), 12 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index 7bc3788c..a78568e9 100644
---- a/Makefile
-+++ b/Makefile
-@@ -13,7 +13,7 @@ linux:
- # force rebuilding all code that depends on hotloading.
- 	touch src/mruby-widget-lib/src/api.c  
- 	cd mruby             && $(HOTLOADING) MRUBY_CONFIG=../build_config.rb rake
--	$(CC) -shared -o libzest.so `find mruby/build/host -type f | grep -v mrbc | grep -e "\.o$$" | grep -v bin` ./deps/libnanovg.a \
-+	$(CC) -shared -o libzest.so `find mruby/build/host -type f \( -not -iwholename "*mrbc*" -a -not -iwholename "*bin*" -a -iname "*.o" \)` \
- 		./deps/libnanovg.a \
- 		src/osc-bridge/libosc-bridge.a \
- 		`pkg-config --libs libuv` -lm -lX11 -lGL -lpthread
-@@ -30,7 +30,7 @@ osx: deps/libuv.a
- 	cd deps/pugl         && python2 ./waf
- 	cd src/osc-bridge    && CFLAGS="-I ../../deps/libuv/include " make lib
- 	cd mruby             && MRUBY_CONFIG=../build_config.rb rake
--	$(CC) -shared -o libzest.so `find mruby/build/host -type f | grep -v mrbc | grep -e "\.o$$" | grep -v bin` ./deps/libnanovg.a \
-+	$(CC) -shared -o libzest.so `find mruby/build/host -type f \( -not -iwholename "*mrbc*" -a -not -iwholename "*bin*" -a -iname "*.o" \)` ./deps/libnanovg.a \
- 		./deps/libnanovg.a \
- 		src/osc-bridge/libosc-bridge.a \
- 		./deps/libuv/.libs/libuv.a  -lm -framework OpenGL -lpthread
-@@ -41,7 +41,7 @@ windows: buildpuglwin deps/libuv-win.a
- 	$(AR) rc deps/libnanovg.a deps/nanovg/src/*.o
- 	cd src/osc-bridge    && CFLAGS="-mstackrealign -I ../../deps/libuv/include " make lib
- 	cd mruby             && WINDOWS=1 MRUBY_CONFIG=../build_config.rb rake
--	$(CC) -mstackrealign -shared -o libzest.dll -static-libgcc `find mruby/build/w64 -type f | grep -e "\.o$$" | grep -v bin` \
-+	$(CC) -mstackrealign -shared -o libzest.dll -static-libgcc `find mruby/build/w64 -type f \( -not -iwholename "*mrbc*" -a -not -iwholename "*bin*" -a -iname "*.o" \)` \
-         ./deps/libnanovg.a \
-         src/osc-bridge/libosc-bridge.a \
-         ./deps/libuv-win.a \
-@@ -98,21 +98,21 @@ stats:
- 	@echo 'mruby-qml-parse  commits: ' `cd src/mruby-qml-parse && git log --oneline | wc -l`
- 	@echo 'mruby-qml-spawn  commits: ' `cd src/mruby-qml-spawn && git log --oneline | wc -l`
- 	@echo 'osc-bridge       commits: ' `cd src/osc-bridge      && git log --oneline | wc -l`
--	@echo 'number of qml    files:' `find src/ -type f | grep -e qml$$ | wc -l`
--	@echo 'number of ruby   files:' `find src/ -type f | grep -e rb$$ | wc -l`
--	@echo 'number of c      files:' `find src/ -type f | grep -e c$$ | wc -l`
--	@echo 'number of header files:' `find src/ -type f | grep -e h$$ | wc -l`
-+	@echo 'number of qml    files:' `find src/ -type f -iname "*.qml" | wc -l`
-+	@echo 'number of ruby   files:' `find src/ -type f -iname "*.rb" | wc -l`
-+	@echo 'number of c      files:' `find src/ -type f -iname "*.c" | wc -l`
-+	@echo 'number of header files:' `find src/ -type f -iname "*.h" | wc -l`
- 	@echo 'lines of OSC schema:' `wc -l src/osc-bridge/schema/test.json`
- 	@echo 'lines of qml:'
--	@wc -l `find src/ -type f | grep qml$$` | tail -n 1
-+	@`find src/ -type f -iname "*.qml" -exec wc -l {} +` | tail -n 1
- 	@echo 'lines of ruby:'
--	@wc -l `find src/ -type f | grep -e rb$$ | grep -v fcache` | tail -n 1
-+	@`find src/ -type f \( -iname "*.rb" -a -not -iwholename "*fcache*" \) -exec wc -l {} +` | tail -n 1
- 	@echo 'lines of c source:'
--	@wc -l `find src/ -type f | grep -e c$$` | tail -n 1
-+	@`find src/ -type f -iname "*.c" -exec wc -l {} +` | tail -n 1
- 	@echo 'lines of c header:'
--	@wc -l `find src/ -type f | grep -e h$$` | tail -n 1
-+	@`find src/ -type f -iname "*.h" -exec wc -l {} +` | tail -n 1
- 	@echo 'total lines of code:'
--	@wc -l `find src/ -type f | grep -Ee "(qml|rb|c|h)$$" | grep -v fcache` | tail -n 1
-+	@`find src/ -type f \( -iname "*.qml" -o -iname "*.rb" -o -iname "*.c" -o -iname "*.h" -a -not -iwholename "*fcache*" \) -exec wc -l {} +` | tail -n 1
- 
- 
- verbose: ## Compile mruby with --trace
diff --git a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-system_wide_location.patch b/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-system_wide_location.patch
deleted file mode 100644
index 101ea3b..0000000
--- a/skip/zynaddsubfx/zynaddsubfx-mruby-zest-build-3.0.6-system_wide_location.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-diff --git i/src/mruby-widget-lib/mrblib/script.rb w/src/mruby-widget-lib/mrblib/script.rb
-index 2d3e7fc..4dbd3c7 100644
---- i/src/mruby-widget-lib/mrblib/script.rb
-+++ w/src/mruby-widget-lib/mrblib/script.rb
-@@ -160,13 +160,13 @@ class ZRunner
-         search   = @search_path
-         search ||= ""
-         font_error = false
--        sans = [search + "font/Roboto-Regular.ttf", "deps/nanovg/example/Roboto-Regular.ttf"]
-+        sans = ["/usr/share/fonts/TTF/Roboto-Regular.ttf", search + "font/Roboto-Regular.ttf", "deps/nanovg/example/Roboto-Regular.ttf"]
-         if(@vg.create_font('sans', sans[0]) == -1 && @vg.create_font('sans', sans[1]) == -1)
-            GL::debug "[ERROR] could not find sans font"
-             font_error = true
-         end
- 
--        bold = [search + "font/Roboto-Bold.ttf", "deps/nanovg/example/Roboto-Bold.ttf"]
-+        bold = ["/usr/share/fonts/TTF/Roboto-Bold.ttf", search + "font/Roboto-Bold.ttf", "deps/nanovg/example/Roboto-Bold.ttf"]
-         if(@vg.create_font('bold', bold[0]) == -1 && @vg.create_font('bold', bold[1]) == -1)
-            GL::debug "[ERROR] could not find bold font"
-             font_error = true
-diff --git i/src/mruby-widget-lib/src/api.c w/src/mruby-widget-lib/src/api.c
-index 6949413..1118717 100644
---- i/src/mruby-widget-lib/src/api.c
-+++ w/src/mruby-widget-lib/src/api.c
-@@ -110,7 +110,7 @@ zest_open(char *address)
-         if(strstr(path, "libzest"))
-             strstr(path, "libzest")[0] = 0;
-         char path2[256];
--        snprintf(path2, sizeof(path2), "%s%s", path, "./qml/MainWindow.qml");
-+        snprintf(path2, sizeof(path2), "%s%s", path, "../../share/zynaddsubfx/qml/MainWindow.qml");
-         FILE *f = fopen(path2, "r");
-         if(f) {
-             printf("[INFO:Zyn] Found Assets at %s\n", path);
-diff --git i/src/osc-bridge/src/bridge.c w/src/osc-bridge/src/bridge.c
-index f87c849..6405bbb 100644
---- i/src/osc-bridge/src/bridge.c
-+++ w/src/osc-bridge/src/bridge.c
-@@ -431,7 +431,7 @@ schema_t br_get_schema(bridge_t *br, uri_t uri)
-     schema_t sch;
- 
-     //printf("[debug] loading json file\n");
--    FILE *f = fopen("schema/test.json", "r");
-+    FILE *f = fopen("/usr/share/zynaddsubfx/schema/test.json", "r");
-     if(!f && br->search_path) {
-         char tmp[256];
-         snprintf(tmp, sizeof(tmp), "%s%s", br->search_path, "schema/test.json");
diff --git a/skip/zynaddsubfx/zynaddsubfx.xibuild b/skip/zynaddsubfx/zynaddsubfx.xibuild
deleted file mode 100644
index 6362364..0000000
--- a/skip/zynaddsubfx/zynaddsubfx.xibuild
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-
-NAME="zynaddsubfx"
-DESC="Opensource software synthesizer capable of making a countless number of instruments."
-
-MAKEDEPS="cmake jack fltk portaudio mxml sndio bash-completion liblo"
-DEPS="less "
-
-PKG_VER=3.0.6
-SOURCE="https://downloads.sourceforge.net/project/zynaddsubfx/zynaddsubfx/$PKG_VER/zynaddsubfx-$PKG_VER.tar.bz2"
-ADDITIONAL="
-"
-
-build () {
-    cmake -B build \
-        -DCMAKE_INSTALL_PREFIX=/usr \
-		-DCMAKE_INSTALL_LIBDIR=/usr/lib 
-	cmake --build build
-}
-
-package () {
-	DESTDIR="$PKG_DEST" cmake --install build
-}